Corpus ID: 137535229

Problems with abrasive dosing in erosive wear process modelling

@inproceedings{Mizak2014ProblemsWA,
  title={Problems with abrasive dosing in erosive wear process modelling},
  author={Wojciech Mizak and Adam Mazurkiewicz and Jerzy Smolik and Andrzej Zbrowski},
  year={2014}
}
Technological progress is the counterpart to the growing demand for novel machines and devices that should be characterised by high reliability, functionality, and an extended time of operation in extreme conditions. The development of aviation, as well as power and petrochemical industries, has resulted in greater expectations as far as structural and functional materials are concerned, particularly when mechanical properties and the resistance to corrosion and erosion are taken into account… Expand

Figures and Tables from this paper

Universal Research Instrumentation for Erosion Tests
The research on erosion resistance can be classified into two groups, i.e. standardized research, conducted with specific parameters of the test and dedicated to commercially available products, andExpand
A method and a device for machine regeneration of anti-wear coating for pipelines
One of the techniques to improve the durability of pneumatic conveying used in industry is covering the inner surface of the pipe with a layer of plastic ceramic material, which, as a result of theExpand
Pneumatic System in a Device for Erosive Wear Tests
The Institute for Sustainable Technologies – National Research Institute developed a device for erosive wear tests that enables the experimental reconstruction of the erosion process and theExpand
KoTnArowsKA AnAlysis of polyurethAne topcoAt destruction influence on erosion kinetics of polyurethAne-epoxy coAting system
Polymer coatings are commonly used in order to protect technical objects surface against destructive action of climatic and environmental factors as well as to improve their visual appearance. UnderExpand
Effects of laser on the non-smooth surface in improving the durability of hot forging tools
Abstract One of the key factors determining the lifetime or durability of hot forging tools is their resistance to wearing. The application of laser technology to prepare a non-smooth unit on theExpand
Evaluation of UV radiation influence on abrasivity of protective-decorative coatings for car bodies
The paper presents investigations concerning physico-chemical properties as well as a resistance to abrasion (abrasivity) of three-layer acrylic-polyester (renovation) coating systems after ageingExpand

References

SHOWING 1-10 OF 21 REFERENCES
Solid particle erosion of AISI 304, 316 and 420 stainless steels
Abstract In this study, solid particle erosion tests were carried out to evaluate the performance of AISI 304, 316 and 420 stainless steels in relation to this wear process. These materials haveExpand
Erosion of hardmetals: Dependence of WC grain size and distribution, and binder composition
Abstract A liquid jet erosion rig was constructed to test hardmetals of interest to the petroleum business sector. Accurate control of eroding silica particles, jet velocities (74, 56 and 37 m/s) andExpand
Erosive wear properties of high V–Cr–Ni stainless spheroidal carbides cast iron at high temperature
Abstract To investigate the high temperature erosive wear properties of materials, a new testing machine was developed, and its performance was evaluated. In this machine, temperature of impactExpand
High temperature wear of cermet particle reinforced NiCrBSi hardfacings
Abstract The aim of the current study was to investigate erosive and impact/abrasive wear behaviour of TiC–NiMo and Cr3C2–Ni reinforced NiCrBSi hardfacings at temperatures up to 700 °C. Coatings wereExpand
Experimental investigation of polymer matrix reinforced composite erosion characteristics
Abstract Solid particle erosion of a composite material of polyetheretherketone (PEEK) matrix and unidirectional (AS4) carbon fiber was investigated experimentally. Erosion tests were conducted withExpand
Thermo-mechanical correlations to erosion performance of short carbon fibre reinforced vinyl ester resin composites
Abstract Thermo-mechanical properties and erosion performance of short carbon fibre reinforced vinyl ester resin based isotropic polymer composites with four different fibre weight fractions haveExpand
Investigation into calibration of discrete element model parameters for scale-up and validation of particle–structure interactions under impact conditions
Abstract Discrete element method (DEM) is a popular numerical method used to understand the discontinuous flow of granular materials and optimise the design and operation of equipment. TheExpand
Analysis of a grain motion in the transfer area of the belt conveyor
Transfer chutes are critical areas within conveyor transfer systems in terms of maintenance and high levels of energy consumption. Appropriate chute design allows material stream to be uniformly fedExpand
A comparison of the gas-blast and centrifugal-accelerator erosion testers: The influence of particle dynamics
The gas-blast and centrifugal-accelerator testers are the two most commonly used erosion testers. An experimental and analytical study was made of the effect of particle characteristics (size, shapeExpand
Elevated temperature erosion of steels
Abstract The elevated temperature erosion behavior of several commercial ferritic and austenitic steels was determined over a range of temperatures from room temperature to 900 °C. It was determinedExpand
...
1
2
3
...