Pressure-volume-temperature relations in liquid and solid4He

@article{Grilly1971PressurevolumetemperatureRI,
  title={Pressure-volume-temperature relations in liquid and solid4He},
  author={E. Grilly},
  journal={Journal of Low Temperature Physics},
  year={1971},
  volume={11},
  pages={33-52}
}
  • E. Grilly
  • Published 1971
  • Materials Science
  • Journal of Low Temperature Physics
PVT relations in liquid and solid4He near the melting curve were measured over 0.3–2.0 K with a cell that used diaphragms for pressure and volume variation. The results were largely self-consistent and were essentially in agreement with the most careful previous work. The high values and strong temperature dependence of thermal expansion in the bcc solid resembled that of a liquid, but there was no evidence to substantiate some previous indications of premelting anomalous heat-capacity behavior… Expand
Constant-volume pressure measurements on BCC solid3He
Measurements have been made of the pressure of the bcc phase of solid3He at molar volumes from 24.2 to 23.2 cm3 and at temperatures from 25 to 0.5 mK. The solid undergoes an unusual antiferromagneticExpand
Heat capacity and pressure at phase separation and solidification of3He in hcp4He
We have measured heat capacity and pressure of 0.45% and 0.9%3He-4He mixtures at pressures between 25 bar and 33 bar and temperatures between 20 mK and 250 mK. The data show the latent heats and theExpand
Properties of melting 3He: Specific heat, entropy, latent heat, and temperature
A sequence of experiments has been performed to measure thermal properties of liquid and solid 3He between the temperatures 1 and 25 mK at melting curve densities. A two-phase mixture of 3He sampleExpand
Liquid-solid phase transitions and compressional cooling in 3He-4He mixtures at temperatures below 0.45 K
Abstract Measurements are presented of liquid-solid phase transitions in 3He-4He mixtures contained in a cell with flexible walls. From adiabatic compressibility measurements between 50 mK and 300 mKExpand
Elementary Excitations in Solid and Liquid 4He at the Melting Pressure
Abstract Recent discovery of a nonclassical rotational inertia (NCRI) in solid 4He below 0.2 K by Kim and Chan has revived great interest in the problem of supersolidity and initiated intensive studyExpand
Specific heat of solid helium
The specific heat of bcc 3He has been measured from 25 mK to near the melting curve, with particular attention given to the region of the low-temperature anomaly, T ≲ 500 mK. The data have beenExpand
Thermodynamic properties of4He. II. The bcc phase and theP-T and V-T phase diagrams below 2 K
The constant-volume heat capacity of 4He has been measured at molar volumes from 20.45 to 29.71 cm3/mole in the temperature range from 0.3 to 4 K. The entropy has been obtained as a function ofExpand
Thermodynamics of freezing and melting of4He in Vycor
Recently it was discovered that helium in confined geometries remains a liquid at pressures considerably above bulk melting. By combining a special technique for measuring pressures in small poresExpand
4 He glass phase: A model for liquid elements
Abstract The specific heat of liquid helium confined under pressure in nanoporous material and the formation, in these conditions, of a glass phase accompanied by latent heat are known. TheseExpand
Zero sound and the melting curve of 3He
Abstract We have analyzed data from existing accurate pressure and molar volume measurements of 3He along the melting curve to determine explicit entropy contributions of the liquid and solid phases.Expand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 44 REFERENCES
Pressure-Volume-Temperature relations of liquid He3 from 1.00 to 3.30°K
Abstract Accurate P-V-T measurements have been made for liquid He3 from 0.98–3.32°K and from saturation pressure to the melting pressure. Included are measurements of the locus of the zero of theExpand
PVT relations in He4 near the melting curve and the λ-line
Measurements on Hes/up 4/, from 1 to 2 deg K, were made of the melting pressure, the volume change on melting, and the compressibility and thermal expansion coefficients of the liquid near melting.Expand
PROPERTIES OF He$sub 3$ AT PRESSURES GREATER THAN THE MINIMUM IN THE MELTING CURVE
Measurements of the specific heat and velocity of sound in He/sup 3/ as functions of Wressure and temperature were obtained for temperatures from 0.02 to 0.3 deg K and pressures grenter than theExpand
Anomalous Liquid-Solid Transformation of Helium-Three
A study was made of the anomalous liquid-solid phase transformation of He/sup 3/. By allowing the phase boundary lines of the liquid and solid volumes to have singular pressure derivatives, theExpand
Anomalous melting properties of He3
Measurements on He/sup 3/ from 0.3 to 1.2 deg K were made of: the melting pressure; the volume change on melting; and the molar volume, compressibility coefficient, and thermal expansion coefficientExpand
Melting curve and related thermodynamic properties of He3 below 1°K
Measurements of the melting curve of He3 have been made between 16.6° mK and 0.7°K. The liquid and solid molar volumes at melting have been extended from 0.33°K to below 0.03°K, and the molar volumeExpand
Low temperature melting curve of He3
Measurements of the melting curve of He3 have been made from 3 m° K to 40 m° K, after cooling the liquid-solid He3 mixture by the adiabatic solidification method. The slope of the melting curve showsExpand
Experimental evidence of a minimum in the melting curve of He4
In the course of melting He/sup 4/ for measurements on the specific heat of liquid He/sup 4/ at temperatures below 1 l K under pressure, evidence for a minimum in the melting curve at 0.76 l K wasExpand
The thermodynamic properties of fluid helium
  • R. W. Hill, O. V. Lounasmaa
  • Physics
  • Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
  • 1960
Measurements have been made from which all the thermodynamic properties of fluid helium can be calculated in the temperature range from 3 to 20 °K and up to 100 atm pressure. The quantities measuredExpand
Thermomolecular pressure corrections in helium vapour pressure thermometry: The effect of the tube surface
Abstract The equation of Weber and Schmidt has been used for some time to describe thermomolecular pressure difference corrections necessary in precise vapour pressure thermometry. Roberts' andExpand
...
1
2
3
4
5
...