Preparation of ethambutol-copper(II) complex and fabrication of PVC based membrane potentiometric sensor for copper.

@article{Gupta2003PreparationOE,
  title={Preparation of ethambutol-copper(II) complex and fabrication of PVC based membrane potentiometric sensor for copper.},
  author={Vinod K. Gupta and Rajendra Prasad and Azad Kumar},
  journal={Talanta},
  year={2003},
  volume={60 1},
  pages={
          149-60
        }
}

Figures and Tables from this paper

Copper(II) ion selective electrode based on a newly synthesized Schiff-base chelate
A new Cu (II) ion-selective electrode has been fabricated in poly (vinyl chloride) matrix based on a recently synthesized Schiff-base chelate. The addition of sodium tetraphenylborate (NaTPB) and
...
...

References

SHOWING 1-10 OF 25 REFERENCES
Copper (II) Sensor Based on a Cephaloridine Antibiotic PVC Matrix
ABSTRACT A poly (vinyl chloride) (PVC) based membrane of cephaloridine as a novel ionophore exhibits good potentiometric response for Cu2+ over a wide concentration range (10−5-10− M) with a slope of
Copper(II)-selective membrane electrodes based on o-xylylene bis(dithiocarbamates) as neutral carriers
o-Xylylene bis(diisobutyl- and methyloctadecyl-dithiocarbamate) were synthesised and used as neutral carriers in membrane electrodes to improve the selectivity for Cu2+. The electrodes based on these
Copper(II)-selective electrodes based on macrocyclic polythiaethers.
PVC membrane electrodes that are selective and sensitive to copper(II) have been developed. The best electrode, based on 13,14-benzo-1,5-tetrathiacyclopentadecane and 2-nitrophenyl octyl ether
5-オクチルオキシメチル-8-キノリノールを用いた銅(II) : イオン選択性電極の開発
Cupric ion selective membrane was prepared by using Cu(5-octyl oxymethyl-8-quinolinol), as the ion-sensing material, dioctyl phenyl phosphonate (DOPP) as the solvent mediator and PVC as the membrane
Determination and application of ion-selective electrode model parameters using flow injection and simplex optimization
A modified form of the Nikolskii–Eisenman equation is proposed in which the power dependence of the interfering ion activity is removed. Selectivity is determined for poly(vinyl chloride) membrane
Solid-state ion-selective electrodes for metal ions
Ion-selective electrodes for divalent metal ions (Cu2+, Pb2+, Cd2+, Hg2+) have been prepared by covering ionic conductors such as Ag2S, Ag3SBr or Ag3SI with a thin metal sulphide layer. The metal
...
...