Preparation of SLS Polypropylene Powder by Solvent Method

@inproceedings{Fang2018PreparationOS,
  title={Preparation of SLS Polypropylene Powder by Solvent Method},
  author={Liang Fang and Yan Wang and Yang Xu},
  year={2018}
}
The application of solvent method in the preparation of polypropylene powders was investigated, including the influence of various technological conditions, such as the raw material melt index of polypropylene, processing temperature, dosage of the solvent and the packing pressure. The experimental data show that using solvent method can effectively produce polypropylene powder, and the optimal technological conditions are: melt index of polypropylene being about 17.8 g/10min, processing… 
View via Publisher
preprints.org
1 Citations
Background Citations
1

Figures from this paper

One Citation

Citation Type

Citation Type

A Review of Methods Used to Reduce the Effects of High Temperature Associated with Polyamide 12 and Polypropylene Laser Sintering
The polymer laser sintering (PLS) process is one of the most promising additive manufacturing (AM) technologies for polymeric materials. However, the technique has challenges because the physical,…

References

SHOWING 1-10 OF 21 REFERENCES
Nanoparticle Effects on Structure and Properties of Polypropylene Meltblown Webs
The effect of nanoclay additive on the structure, morphology, and mechanical properties of poly- propylene meltblown webs is reported here for the first time. Effect of nanoclay on the meltblown…
Selective laser sintering of polyamide 12/potassium titanium whisker composites
The excellent performance of potassium titanium whiskers (PTWs) reinforced plastics has been recognized; however, because of their large length-to-diameter ratio, they have not been applied in…
Investigation into mechanical and microstructural properties of polypropylene manufactured by selective laser sintering in comparison with injection molding counterparts
Laser sintering of polyamides and other polymers
Effect of manganese nanoparticles on the mechanical, thermal and fire properties of polypropylene multifilament yarn
Study of laser‐sinterability of ferro‐based powders
Purpose – To find the suitable parameters for selective laser sintering (SLS) of selected ferro‐based powders. These parameters will help to create products having appreciable strength shown by the…
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
TLDR
Determining the effective setup of parameters, developing improved biocompatible/bioactive materials, and improving the mechanical/biological properties of laser sintered and 3D printed tissues are the three main concerns which have been investigated in this article.
Scratch resistance of mineral‐filled polypropylene materials
Pigmented mineral-filled polypropylene (PP-PMF) is marketed as a potential alternative to acrylonitrile-butyldiene-styrene (ABS) and Polycarbonate/ABS for automotive interior components. PP-PMF is…
Preparation of nylon 66/mesoporous molecular sieve composite under high pressure
Nylon 66/mesoporous molecular sieve (pore diameter: 2.7 nm) composites were prepared by annealing mixtures of nylon 66 and mesoporous molecular sieve (FSM) powders under high pressures and high…
THE EFFECT OF CARBON NANOTUBE ORIENTATION AND CONTENT ON THE MECHANICAL PROPERTIES OF POLYPROPYLENE BASED COMPOSITES
...
1
2
3
...