Preparation and characterization of polystyrene/polycarbonate composite hollow microspheres by microencapsulation method

@article{Li2011PreparationAC,
  title={Preparation and characterization of polystyrene/polycarbonate composite hollow microspheres by microencapsulation method},
  author={Jiewen Li and Shujun Wang and Hongyan Liu and Sufang Wang and Long You},
  journal={Journal of Materials Science},
  year={2011},
  volume={46},
  pages={3604-3610}
}
Polystyrene/polycarbonate (PS/PC) composite hollow microspheres were successfully prepared via microencapsulation method. Fourier-transform infrared spectroscopy, scanning electron microscopy (SEM), differential scanning calorimetry, and thermogravimetric analysis were used for the characterization of the obtained hollow microspheres. SEM images showed that there were a big cavity and some small cavities inside the composite hollow microspheres, and the hollow microspheres prepared at 42 °C… Expand
Facile synthesis of hollow polymeric microparticles possessing various morphologies via seeded polymerization
In this paper, hollow poly(styrene-co-divinylbenzene-co-methacrylic acid) microparticles possessing various morphologies were synthesized by a combination of seeded polymerization and SPG membraneExpand
Preparation of hollow PPy (HPPy) microspheres via template methods with characterization of properties
ABSTRACT Template-synthesis method was one of the important methods for the preparation of hollow microspheres. In present work, polystyrene (PS) microspheres were initially synthesized and effectsExpand
A new simple method to prepare hollow PES microspheres
A new simple method for the formation of hollow polyethersulfone (PES) microspheres was reported in this paper. Coaxial electrospraying equipment and nonsolvent precipitating bath were used toExpand
Synthesis of monodisperse poly(styrene-co-divinylbenzene) microspheres with binary porous structures and application in high-performance liquid chromatography
Monodisperse poly(styrene-co-divinylbenzene) (PS-DVB) microspheres with binary porous structures were synthesized using a modified seeded polymerization method. The microspheres had small pores onExpand
Study on Synthesis of Polyacrylamide Microspheres and its Sealing Characteristics of Drilling Fluid
For the purpose of reducing the invasion depth of solid phase and liquid phase of drilling fluid and improving the quality of drilling mud cake, polyacrylamide microspheres were successfully composedExpand
Physical characterizations of three phase polycarbonate nanocomposites
Zinc oxide–Barium titanate–Polycarbonate (ZnO−BaTiO3−PC) nanocomposites were prepared to investigate effect of ZnO–BaTiO3 mixed nanoparticles on the optical, electrical, and thermal properties ofExpand
Preparation and Characterization of Magnetic Chitosan Microcapsules
By dispersing aqueous precipitant in liquid paraffin to prepare a W/O emulsion then adding chitosan (CS) solution, CS microcapsules have been successfully prepared. It is a facile way to prepareExpand
Plasticizers Induced Formation of Microcapsules From Freeze Dried Polystyrene Microreactors
The article describes solvent induced preparation of polystyrene microcapsules from freeze-dried microreactors. An aqueous suspension of microreactors was exposed to a plasticizing solvent for aExpand
Preparation and Characterization of Magnetic ChitosanMicrocapsules
1 Department of Materials Science and Engineering, College of Materials, Xiamen University, Xiamen 361005, China 2 Fujian Provincial Key Laboratory of Fire Retardant Materials, Xiamen University,Expand

References

SHOWING 1-10 OF 27 REFERENCES
Sol-emulsion-gel synthesis of hollow mullite microspheres
Hollow mullite microspheres were obtained from emulsified diphasic sols by an ion extraction method. The surfactant concentration and viscosity of the sols were found to affect the characteristics ofExpand
Preparation of porous and nonporous biodegradable polymeric hollow microspheres
Abstract A simple method to prepare various porous and nonporous hollow microspheres composed of poly( d,l -lactic-co-glycolic acid) using a water/oil/water (W/O/W) multiple emulsion solventExpand
Polystyrene/bisphenol A polycarbonate molecular composite by in situ polymerization. I. Preparation and characterization
Polystyrene (PS) and bisphenol A polycarbonate(PC) molecular composites prepared by in situ polymerization techniques have been investigated by FT-IR, 1 H NMR, scanning electron microscopy (SEM),Expand
Effect of preparation conditions on morphology and release profiles of biodegradable polymeric microspheres containing protein fabricated by double-emulsion method
Abstract We have investigated the key parameters to fabricate PDLLA (Poly( dl -lactic acid)), PDLLGA (Poly( dl -lactic-co-glycolic acid) 65 : 35 and blends of PDLLGA 65 : 35 and PEG (Poly(ethyleneExpand
Effect of preparation temperature on the characteristics and release profiles of PLGA microspheres containing protein fabricated by double-emulsion solvent extraction/evaporation method.
  • Y. Yang, H. Chia, T. Chung
  • Medicine, Materials Science
  • Journal of controlled release : official journal of the Controlled Release Society
  • 2000
TLDR
It is suggested that preparation temperature significantly affects microsphere formation, resulting in their structural and protein release profile differences, which ultimately work together to affect the initial release and overall release patterns of the microspheres. Expand
Polystyrene/melamine-formaldehyde hollow microsphere composite by self-assembling of latex particles at emulsion droplet interface
Abstract Submicron scale particle aggregates with defined shape were prepared by self-assembling of sulphonated polystyrene latex particles at the interface of emulsion droplets. Several parametersExpand
Preparation and properties of poly(urea–formaldehyde) microcapsules filled with epoxy resins
Abstract The poly(urea–formaldehyde) (PUF) microcapsules filled with epoxy resins have potential for self-healing or toughening polymeric composites. A series of PUF microcapsules containing epoxyExpand
Fabrication of polystyrene hollow microspheres as laser fusion targets by optimized density-matched emulsion technique and characterization
Inertial confinement fusion, frequently referred to as ICF, inertial fusion, or laser fusion, is a means of producing energy by imploding small hollow microspheres containing thermonuclear fusionExpand
Double emulsion templated microcapsules with single hollow cavities and thickness-controllable shells.
TLDR
A novel form of microcapsules, which possess single hollow cavities and thickness-controllable shells, were prepared by a two-step emulsification, emulsion ripening, and suspension polymerization, and could be further exploited as microreactors with functional cores to be loaded and would be especially suitable to encage bioactive materials. Expand
Morphology, drug distribution, and in vitro release profiles of biodegradable polymeric microspheres containing protein fabricated by double-emulsion solvent extraction/evaporation method.
TLDR
Clinical micrographs reveal that the polyvinylalcohol (PVA as an emulsifier) concentration in the external water phase strongly influences drug distribution within microspheres and release profiles, and the presence of PVA in the internal water phase enhances the stabilization of inner water droplets against coalescence. Expand
...
1
2
3
...