Preparation and application of nickel based carbon fibers for the steam reforming of methane

@article{Yu2017PreparationAA,
  title={Preparation and application of nickel based carbon fibers for the steam reforming of methane},
  author={Lei Yu and Min Gyeong Song and Ruiqi Gao and Yuexing Wei},
  journal={Reaction Kinetics, Mechanisms and Catalysis},
  year={2017},
  volume={120},
  pages={477-488}
}
The steam and KOH activation methods were used to activate lignin based carbon fibers. The original and activated carbon fibers were applied to prepare three kinds of nickel based catalysts. The characterization results illustrated that the KOH activated carbon fibers (KACF) possessed the best surface structural parameters. The tests for catalytic performance showed that the catalyst supported on the KACF was the greatest in the steam reforming of methane. Based on that, the catalysts with… CONTINUE READING

Figures and Tables from this paper.

References

Publications referenced by this paper.
SHOWING 1-10 OF 37 REFERENCES

influence of process parameters on hydrogen yield-A review

P Parthasarathy, Narayanan KS Hydrogen production from steam gasification of biomass
  • Renew Energy 66:570–579 Fig. 6 Comparison of the catalytic performance of 5% Ni/ KACF and 5% Ni/c-Al2O3 during methane decomposition. Reaction conditions: amount of catalysts = 1 g, N2 = 50 mL/ min, CH4 = 100 mL/min 486 Reac Kinet Mech Cat
  • 2017

CO 2 reforming of methane over NiCo / ZSM 5 catalysts . Aging and carbon deposition study

J Estephane, S Aouad, +6 authors EA Aad
  • Int J Hydrog Energy
  • 2015

fibers from electrospun poly - ( caffeyl alcohol ) lignin

S Wang, Y Li, +3 authors M Zhu
  • 2015