Preparation and Research of the High-Strength Lightweight Concrete Based on Hollow Microspheres

  title={Preparation and Research of the High-Strength Lightweight Concrete Based on Hollow Microspheres},
  author={Evgeniy Valerjevich Korolev and Alexandr Sergeevich Inozemtcev},
  journal={Advanced Materials Research},
  pages={285 - 288}
The paper presents the results of research aimed at development of nanomodified high-strength lightweight concrete for construction. The developed concretes are of low average density and high ultimate compressive strength. It is shown that to produce this type of concrete one need to use hollow glass and aluminosilicate microspheres. To increase the durability of adhesion between cement stone and fine filler the authors offer to use complex nanodimensional modifier based on iron hydroxide sol… 
A Novel, Multifunctional, Floatable, Lightweight Cement Composite: Development and Properties
It is found that an optimized amount of PE fiber is beneficial for improving the tensile resistance and ductility of FLCC while a relatively large amount of microspheres can increase the entrapped air voids in the FLCC matrix and reduce its density and thermal conductivity.
Properties of Light-weight Extruded Concrete with Hollow Glass Microspheres
Abstract The article is devoted to the study of properties of light-weight extruded fine-grain cement concrete with hollow glass microspheres (HGMS). For improving the properties of light-weight
Effective Light-weight Masonry Mortars with Dispersed Reinforcement☆
Abstract The article is devoted to the development of masonry mortars with hollow ceramic microspheres and reinforcing fibers with improved properties. The mortars with ceramic microspheres and
In-situ micro-CT characterization of mechanical properties and failure mechanism of cementitious syntactic foams
Abstract The advancements in structural materials are guided by the desire of lowering the density and increasing the strength. Composite materials show promise in tuning the density and strength to
Fibre-reinforced lightweight engineered cementitious composites for 3D concrete printing
Abstract While the 3D printing technology for cementitious composites has developed rapidly, a combination of 3DP technology and lightweight engineered cementitious composites (LWECCs) could improve
Properties of modified dry masonry mixtures for effective masonry units
The paper is devoted to the problem of the development of dry light-weight mixtures with hollow ceramics microspheres (CMS) for masonry works. For the one-layer fencing structures including effective
Technical and Economical Efficiency for Application of Nanomodified High-Strength Lightweight Concretes
The development of construction technologies is impossible without the proper estimation of economical efficiency. Some results of technical and economical efficiency of the developed high-strength
Properties of the Dry Masonry Mixtures with Hollow Ceramics Microspheres
The article is devoted to the development of dry masonry mixtures on the basis of hollow ceramics microspheres. It considers the effect of the concentration of hollow ceramics microspheres of
Stress Distribution in Microregion of Core–Shell Structure Lightweight Aggregate Concrete
An in-depth understanding of the effect of cordierite/belite core–shell structure lightweight aggregate (CSLWA) on the mechanical performance of LWA concrete (LWAC) is critical for improving the
A high-strength lightweight concrete made using straw
This experimental work aims to develop an eco-lightweight concrete with excellent mechanical and thermophysical properties using straw. Thus, this paper considers the use of a formulation of an ult...


Strength properties of lightweight concrete made with basaltic pumice and fly ash
This paper presents a part of the results of an ongoing laboratory work carried out to design a structural lightweight concrete (SLWC) made with basaltic pumice (scoria) as aggregate and fly ash as
Processing and characterization of a lightweight concrete using cenospheres
A study has been conducted in which a lightweight concrete was processed using ceramic microspheres, known as cenospheres, as a primary aggregate. The mechanical properties, including compressive
Properties of high-performance LWAC for precast structures with Brazilian lightweight aggregates
Abstract An experimental study was carried out to examine five mixtures made with selected Brazilian lightweight aggregates in order to produce lightweight aggregate concrete (LWAC) for slim precast
Wettability and spreading kinetics of molten aluminum on copper-coated ceramics
The purpose of this study was to investigate the influence of Cu-coating on the spreading kinetics and equilibrium contact angles of aluminum on ceramics using a sessile drop technique. Al2O3 and SiC
Lightweight concrete in hot coastal areas
Abstract An experimental study was carried out to examine different mixtures made with selected lightweight aggregates for the purpose of producing lightweight concrete. A relatively suitable product
Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment
Experimental work has been done to determine changes in the particle shape of portlandite grown in the presence of different ions. To quantify the experimentally observed changes in morphology a new
  • diss. ... cand. tech. science. St. Petersburg
  • 2012
in: proceedings of the second conf
  • «Sol-gel». Sevastopol
  • 2012
  • diss. ... cand. tech. science. Moscow
  • 2007
Evaluation of fatigue durability precast PC slab lightweight high-strength
  • Technical Report Ishikawajimaharima
  • 2004