Prediction of geometrical profile in slit rolling pass

@article{Lambiase2014PredictionOG,
  title={Prediction of geometrical profile in slit rolling pass},
  author={Francesco Lambiase},
  journal={The International Journal of Advanced Manufacturing Technology},
  year={2014},
  volume={71},
  pages={1285-1293}
}
  • F. Lambiase
  • Published 5 January 2014
  • Materials Science
  • The International Journal of Advanced Manufacturing Technology
In the shape rolling process, the reduction of the number of passes is a challenging topic for the steel industry. This can be achieved by enhancing the design approach or by developing new rolling passes that allow the production of high cross-section reductions such as with the slit roll pass. However, in order to design a robust roll pass, the lateral spread of the workpiece must be predicted correctly to prevent incomplete, or even worse, excessive roll groove fulfilling (which may cause… 
Numerical and experimental study of the taper-rolling process for producing a helical blade from a metal strip
In-depth understanding and quantification of the forming characteristics of the taper-rolling process are crucial for process design and parameters determination in order for producing a desired
Analysis of Roll Wear Costs During Multi-Strand Rolling of Ribbed Bars Using New Slitting Pass System
Abstract The paper presents a modification of the slitting pass system, which ensured a reduction in roll wear during three-strand rolling of ribbed bars with a diameter of 16 mm, and thus reduced
IMPROVING THE EFFICIENCY OF THE ROLLING PROCESS OF 16 MM RIBBED BARS IN THE THREE-STRAND TECHNOLOGY
  • Materials Science
  • 2021
The paper presents a modification of the slitting pass system for the three-strand rolling of 16 mm-diameter ribbed bars, which will reduce the wear of rolls, and thus increase the economic
Research on the characteristics of forward slip and backward slip in alloyed bar rolling by the round-oval-round pass sequence
For determining the neutral line on the contact zone to distinguish the forward slip zone and backward slip zone on the contact surface between the deformed pieces and the roll, the contact surface
Recent development trends in metal forming
Analysis of weld bead characteristics on GMAW by changing wire electrode geometry
Purpose: Welding is one of the important processes for the manufacture of a wide variety of products. Most of the manufactured products have to be produced by welding due to its greater productivity
Evolution of electrode geometry shape and their weld quality in FCAW
For structural steel applications, bridge construction and heavy equipment repair, flux-cored welding has become a standard and reliable process due to its ability to provide high-deposition rates

References

SHOWING 1-10 OF 30 REFERENCES
Dimensional analysis in steel rod rolling for different types of grooves
Sequence design for shape-rolling processes consists of roll pass and profile design, i.e., transforming the billet into a final shape. For the prediction of the mean effective strain of the
A new method for calculating spread in rod rolling
ConclusionsFor the development of a new spread formula for computer control of rod rolling process, the spread characteristics of hot rolling of mild steel rods in the Square-Oval, Round-Oval,
Examination of the effect of slitting roller shape on band slitting during the multi slit rolling process
AbstrAct Purpose: Basing on the results of computer simulations, it will be possible to choase proper technological parameters for the slitting rollers (such as shape), which will assure the slitting
Slitting criterion for various rolling speeds in MSR rolling process
Purpose: The main idea of MSR technology is the capability of producing two, three, four and even five rods simultaneously from a single strip in a hot rolling process. Correctly separation of the
...
1
2
3
...