Corpus ID: 212549230

Power Factor Correction Using Step-Up Chopper Fed to a DC Motor Drive

  title={Power Factor Correction Using Step-Up Chopper Fed to a DC Motor Drive},
  author={L. Karunakar and N. Naveena and P. Sowjanya and K. Lakshmi},
With the expanding interest for power from the ac line and more stringent cutoff points for power quality, power factor correction is extraordinary consideration as of late. An assortment of circuit topologies and control strategies has been created for the PFC application. While the discontinuous conduction mode (DCM) converters for example, boost and fly back converters are appropriate for low power applications. Continuous conduction mode (CCM) support converters with normal current mode… Expand

Figures from this paper


A High-Efficiency AC/DC Converter With Quasi-Active Power Factor Correction
  • H. Athab, D. Lu
  • Engineering
  • IEEE Transactions on Power Electronics
  • 2010
  • 78
A novel forward AC/DC converter with input current shaping and fast output voltage regulation via reset winding
  • 19
  • PDF
An alternative approach to synthesizing single-stage converters with power-factor-correction feature
  • 25
Reduction of voltage stress in integrated high-quality rectifier-regulators by variable-frequency control
  • M. Jovanovic, D. Tsang, F. Lee
  • Engineering
  • Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94
  • 1994
  • 186
A new family of single-stage isolated power-factor correctors with fast regulation of the output voltage
  • 469
  • PDF
Generalized topologies of single-stage input-current-shaping circuits
  • 68
  • PDF
Fly boost power factor correction cell and a new family of single-stage AC/DC converters
  • IEEE Trans. Power Electron.,
  • 2005
New topologies of active input current shapers to allow ACto - DC converters with asymmetrically driven transformers to comply with the IEC - 10003 - 2
  • IEEE Trans . Power Electron .
  • 2005
Single-stage single-switch power factor AC/DC converter
  • Inst. Electr. Eng. Proc. Electr. Power Appl.,
  • 2005