Polymer-in-salt like conduction behavior of small-molecule electrolytes.

@article{Wang2004PolymerinsaltLC,
  title={Polymer-in-salt like conduction behavior of small-molecule electrolytes.},
  author={Hongxia Wang and Zhaoxiang Wang and Bofei Xue and Qingbo Meng and Xuejie Huang and Liquan Chen},
  journal={Chemical communications},
  year={2004},
  volume={19},
  pages={
          2186-7
        }
}
Abnormal salt content dependence of conductivity is observed in solid electrolytes exclusively composed of small molecules of 3-hydroxypropionitrile (HPN) and lithium iodide (LiI) induced by reinforced hydrogen bonding and formation of ionic clusters at high salt content. 

Figures from this paper

Water Domain Enabled Transport in Polymer Electrolytes for Lithium-Ion Batteries
Widespread commercial adoption of polymer electrolytes for lithium-ion batteries has been hindered by subpar transport properties, namely, ionic conductivities of <1 mS/cm at room temperature and s...
Polymer-in-salt solid electrolytes for lithium-ion batteries
Solid-state polymer lithium-ion batteries with better safety and higher energy density are one of the most promising batteries, which are expected to power future electric vehicles and smart grids....
Performance of “Polymer-in-Salt” Electrolyte PAN-LiTFSI Enhanced by Graphene Oxide Filler
Exploring solid state electrolytes with high ionic conductivity and good electrochemical stability is of prime importance for the development of safe batteries. In this study, we prepare a
A Novel Small-Molecule Compound of Lithium Iodine and 3-Hydroxypropionitride as a Solid-State Electrolyte for Lithium-Air Batteries.
TLDR
These findings provide a new way to design solid-state electrolytes toward high-performance lithium-air batteries based on LiIHPN as the electrolyte, which is utterly different from the I(-)-anion conductor of LiI(HPN)2 reported previously.
Optimization the solid-state electrolytes for dye-sensitized solar cells
The dye-sensitized solar cell (DSC) as a low price photovoltaic technology has attracted widespread attention in recent years. During its progress to practical application, replacement of the liquid
An all solid-state rechargeable lithium-iodine thin film battery using LiI(3-hydroxypropionitrile)2 as an I− ion electrolyte
All solid-state thin film batteries of lithium-iodine can be simply fabricated by coating a thin solid LiI(HPN)2 electrolyte layer on the surface of an Li plate and then exposing its surface to I2
Towards Optimization of Materials for Dye-Sensitized Solar Cells
Dye-sensitized solar cells (DSCs) have received widespread attention owning to their low cost, easy fabrication, and relatively high solar-to-electricity conversion efficiency. Based on the
...
1
2
...

References

SHOWING 1-5 OF 5 REFERENCES
Connectivity, ionic interactions, and migration in a fast-ion-conducting polymer-in-salt electrolyte based on poly(acrylonitrile) and LiCF3SO3
The ionic conductivity of a polymeric fast-ion-conductor based on LiCF3SO3 salt and poly(acrylonitrile), [CH2CH(CN)]n), is enhanced by ∼5 orders of magnitude when the composition approaches the
Rubbery solid electrolytes with dominant cationic transport and high ambient conductivity
EFFORTS to develop a high-voltage, lightweight rechargeable battery for electrically powered vehicles have focused on batteries based on solid electrolytes, which offer good mechanical strength, easy
Pre‐resonance Raman effect on the OD stretching Raman spectra of methanolic LiX solutions (X = Cl, Br and I)
Intensities of the OD stretching modes in the Raman spectra of LiX solutions (X = Cl, Br and I) in CH 3 OD were measured. It is shown that the intensities increase significantly with increasing