Pilot Test on the Removal of Coke Powder from Quench Oil Using a Hydrocyclone

@article{Ma2013PilotTO,
  title={Pilot Test on the Removal of Coke Powder from Quench Oil Using a Hydrocyclone},
  author={Liang Ma and Q. Yang and Yuan Huang and Peng Qian and Jiayi Wang},
  journal={Chemical Engineering \& Technology},
  year={2013},
  volume={36},
  pages={696-702}
}
  • Liang Ma, Q. Yang, +2 authors Jiayi Wang
  • Published 2013
  • Engineering
  • Chemical Engineering & Technology
According to the characteristics of quench oil and coke powder, an experimental setup is designed with a hydrocyclone for a pilot test. The relationships between structure size, flow rate, pressure drop, and separation efficiency are evaluated. The separation is successful in stable, long-period operations without complications. The stability of the separation significantly helps decrease covert damage to equipment such as fractionating towers, pumps, and heat-exchange facilities. 
Treating Methanol‐to‐Olefin Quench Water by Minihydrocyclone Clarification and Steam Stripper Purification
In the chemical industry, methanol-to-olefin (MTO) technology is a novel process for producing ethylene and propylene from naphtha thermal cracking. The process of recovering MTO quench water byExpand
Closed Process of Shale Oil Recovery from Circulating Washing Water by Hydrocyclones
The conventional oil recovery system in the Fushun oil shale retorting plant has a low oil recovery rate. A large quantity of fresh water is used in the system, thereby consuming a considerableExpand
Optimization of Design and Performance of Solid‐Liquid Separators: A Thickener Hydrocyclone
Studies on hydrocyclones have evolved over recent years and various configurations of this device have been proposed in the literature for different purposes. Herein, an innovative geometricalExpand
Application of Minihydrocyclones in Methanol‐to‐Olefin Process Wastewater Treatment
A significant amount of wastewater containing fine catalyst particles is produced in the methanol-to-olefin (MTO) process, which restricts the long-period operation of the processing unit. To addressExpand
Acid Mist Cyclone Separation Experiment on the Hydrochloric Acid Regeneration System of a Cold Rolling Steel Plant
In the hydrochloric acid regeneration system of a cold rolling steel plant, the large amounts of hydrochloric acid droplets and iron oxide dust in the flue gas at the absorption column outlet causeExpand
Hydrocyclone used for in-situ sand removal of natural gas-hydrate in the subsea
Abstract The extraction of natural gas hydrates (NGH) for using as an alternative energy source necessitates the separation of sands from the mixed slurry of gas hydrates and backfill of the sandExpand
Separation performance of desanding and deoiling hydrocyclones treating three-phase feeds: Effect of oil-particle aggregates
Abstract The study presents preliminary results on the separation of a three-phase (oil, particulate SiO2, water) feed by desanding and deoiling hydrocyclones. Optical microscopy confirms formationExpand
An experimental study of flow distribution and separation performance in a UU-type mini-hydrocyclone group
Abstract In industrial applications, it is common to use multiple mini-hydrocyclones in parallel to improve separation precision. Maintaining the uniformity of flow distribution and the low pressureExpand
Hydrodynamics and mass transfer in an internal airlift slurry reactor for process intensification
Abstract By combining the prominent advantage of directional fluid flow in an internal airlift loop reactor with the cheap cost of liquid-solid separation in a hydrocyclone, a new slurry reactor forExpand
Application of Gas Cyclone-Liquid Jet Absorption Separator for Flue-Gas Desulfurization
ABSTRACTA gas cyclone–liquid jet absorption separator integrates the functions of cyclone separation, liquid jet atomization, and absorption separation. This study employed this device to conduct aExpand
...
1
2
...

References

SHOWING 1-10 OF 32 REFERENCES
Removal of Catalyst Particles from Oil Slurry by Hydrocyclone
Abstract Small diameter (10 mm) hydrocyclone is used for catalyst particles separations in this work. An industrial sidetrack tester was set up in 1.8 Mt/a catalytic cracking unit. When ReynoldsExpand
Oil–water separation using hydrocyclones enhanced by air bubbles
Abstract In order to improve the separation efficiency of dispersed oil from water by hydrocyclones, a new process of utilizing air bubbles has been developed to enhance the separation efficiency.Expand
Centrifugal separation efficiency in the treatment of waste emulsified oils
Oil-in-water (O/W) emulsions used in machining processes were treated in a laboratory bottle centrifuge and in a pilot-scale disc-stack centrifuge. Small amounts of a coagulant salt (CaCl 2 , in theExpand
Numerical and Experimental Study on the Removal of Catalyst Particles from Oil Slurry by Hydrocyclone
Abstract A new process of catalyst particles separations based on hydrocyclone technology is designed and an industrial sidetrack tester was set up in an 1.8 Mt/a catalytic cracking unit. In order toExpand
Flue gas treatment for SO2 removal with air-sparged hydrocyclone technology.
TLDR
The research results indicate that the air-sparged hydrocyclone can be used as a highly efficient absorber for SO2 emissions. Expand
Preparation of high performance electrorheological fluids with coke-like particles from FCC slurry conversion
Abstract The electrorheological fluid (ERF) with coke-like particles from thermal conversion of fluid catalytic cracking (FCC) slurry was prepared and their ER performance was investigated. TheExpand
Performance characteristics for particles of sand FCC and fly ash in a novel hydrocyclone
With growing industrialization in power sector and petrochemical industries water has been contaminated with particulates like sand, fly ash and FCC. In the present investigation, a new type ofExpand
Experimental study of a hydrocyclone under cyclic flow conditions for fine particle separation
Abstract The difficulty in separating fine particles is described in this paper. The basic separating principle of hydrocyclones and the cyclic experimental research facilities are also introduced.Expand
Temperature, classification and dewatering in 10 mm hydrocyclones
Abstract Small diameter hydrocyclones have had an increasing use in performing difficult phase separations in many industries. Further, these 10 mm diameter hydrocyclones also have the potential toExpand
Performance and design of hydrocyclones—I: General considerations
Abstract In a series of papers correlations are developed for the pressure drop and the separating power of hydrocyclones and rules for establishing the optimum design of hydrocyclones are derived.Expand
...
1
2
3
4
...