Piezoelectric and piezoresistive behavior of unmodified carbon fiber

  title={Piezoelectric and piezoresistive behavior of unmodified carbon fiber},
  author={Xiang Xi and D. D. L. Chung},

Figures and Tables from this paper

Electret, piezoelectret and piezoresistivity discovered in steels, with application to structural self-sensing and structural self-powering

Electret, piezoelectret, piezoresistivity and stress-dependent electric permittivity are reported in unmodified steels. Structural stress/strain self-sensing based on piezoelectret/piezoresistivity

Electromechanical Assessment and Induced Temperature Measurement of Carbon Fiber Tows under Tensile Condition

The paper presents an investigation and analysis of the electromechanical and thermal characteristics of the carbon fiber alone as single tow and embedded in host materials such as polymer e.g.,

Electromechanical analysis of self-sensing CFRP and its application to real-time non-destructive evaluation

  • H. RohY. Park
  • Engineering
    Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring
  • 2020
Electromechanical behavior of carbon-fiber-reinforced plastics (CFRPs) was investigated by monitoring the electrical resistance changes with respect to mechanical loading to utilize its self-sensing



Electromechanical behavior of carbon fiber

Carbon fibers are widely used as a reinforcement in structural composites. The use of these fibers that are already in the composite for strain sensing eliminates the need for strain gages, optical

Negative piezoresistivity in continuous carbon fiber epoxy-matrix composite

The negative and positive piezoresistivity in continuous carbon fiber epoxy-matrix composite has been clarified. The negative piezoresistivity associated with the increase of the through-thickness

Study of piezoresistance effect in carbon fibers

Processing-structure-property relationships of continuous carbon fiber polymer-matrix composites

  • D. Chung
  • Materials Science, Engineering
  • 2017

Practical characterisation of the piezo electric properties of a 3K T300 carbon fibre for impact sensoring

This paper discusses the results obtained during the practical characterization of the piezo electric properties of a commonly used carbon fibre. The aim of the investigation was to prepare the

Investigating the energy harvesting capabilities of a hybrid ZnO nanowires/carbon fiber polymer composite beam

The piezoelectric behavior of the composite beam was demonstrated under different vibration sources such as water bath sonicator and permanent magnet vibration shaker and a maximum power output 2.5 nW was achieved.