Perry's Chemical Engineers' Handbook

@inproceedings{Perry2007PerrysCE,
  title={Perry's Chemical Engineers' Handbook},
  author={Robert Hastings Perry and Don W. Green and James O. Maloney},
  year={2007}
}
Conversion Factors.Physical and Chemical Data.Mathematics.Thermodynamics.Heat and Mass Transfer.Fluid and Particle Mechanics.Reaction Kinetics.Process Control and Instrumentation.Process Economics.Transport and Storage of Fluids.Heat Transfer Operations and Equipment.Drying, Humidification and Evaporative Cooling.Distillation.Gas Absorption and Other Gas-Liquid Operations and Equipment.Solid-State Operations and Equipment.Size Reduction and Size Enlargement.Handling of Bulk Solids and Packaging… Expand
MATHEMATICAL MODELLING AND SIMULATION OF FLUIDIZED BED DRYING SYSTEM Prof .
of all the unit operations used by the process industries, drying is probably the oldest and the most common one found in diverse fields such as agricultural, chemical, food, pharmaceutical, pulp andExpand
Mechanical Transport and Storage Equipment
Mechanical transport of food materials may be divided into fluid and solid transport. The mechanical transport of air, gases, and vapors is carried out by fans, blowers, compressors, vacuum pumps,Expand
A framework for the optimization of chemical looping combustion processes
Abstract Chemical looping combustion is a transformative electricity generation process with the potential for high efficiency and a unique approach to carbon capture capable of achieving very lowExpand
A calculation procedure for a heat exchanger and bypass equipment
  • G. Manenti
  • Computer Science, Mathematics
  • Comput. Chem. Eng.
  • 2011
TLDR
A calculation procedure for a heat exchanger and bypass equipment is described, along with relevant numerical model and solving technique, which can be conceptually extended to other specific applications and applied either to rating or design calculations. Expand
Energy balance and design equation for the milling of low-melting organic solids
To model the behavior of a three-phase stream involving a change of state, an energy balance is derived and then reduced into a practical design equation for a hammer mill. A combination ofExpand
Dimensionless Formulation of Convective Heat Transfer in Fry‐Drying of Sewage Sludge
Fry-drying is an alternative for heat and mass transfer intensification. The process reuses waste oil as a heating medium for drying by contact with the wet sludge. At the end of the process, aExpand
Multiple Transport Processes in Solid Oxide Fuel Cells
This chapter discusses three important issues which concern the theoretical fundamentals and practical operation of a solid oxide fuel cell. The thermodynamic and electrochemical fundamentals of aExpand
Volumetric heat transfer coefficient in fluidized bed dryers
Fluidized bed dryers are widely used in the food and chemical industries to dry wet granular solids fast and effectively. The mathematical models of fluidized bed drying require a transferExpand
4 – FLUID FLOW
Transportation of fluids is important in the design of chemical process plants. In the chemical process industries (CPI), pipework and its accessories such as fitting make up 20–30% of the totalExpand
A new char combustion kinetic model 1. Formulation
This paper describes the development and formulation of a novel char combustion kinetic model for pulverised coal. The chemical reaction rate was considered as a function of coal intrinsic reactivityExpand
...
1
2
3
4
5
...