Performance Testing Wear Resistant Used on Shredder Hammers

  • Published 2009


Various hardfacing materials were tested on shredder hammer heads under operational conditions. A typical test chart is included together with some illustrations of good and badly worn hammers. Deposition and metal recovery rates by stick and wire electrodes are compared along with basic material costs. A few replaceable heads were tested with promising results.

4 Figures and Tables

Cite this paper

@inproceedings{HAMMERS2009PerformanceTW, title={Performance Testing Wear Resistant Used on Shredder Hammers}, author={SHREDDER HAMMERS}, year={2009} }