PLATE WAVES PRODUCED BY TRANSVERSE MATRIX CRACKING
@inproceedings{Gorman1991PLATEWP, title={PLATE WAVES PRODUCED BY TRANSVERSE MATRIX CRACKING}, author={Michael R Gorman and Steve M. Ziola}, year={1991} }
Abstract Transverse matrix cracks were induced in cross-ply laminate graphite/epoxy coupons by tensile loading. The resulting acoustic emission (AE) was shown to consist of plate waves. Both the extensional mode and flexural mode were detected. The extensional mode contained higher frequency components of larger amplitude than the flexural mode. By filtering out the flexural wave components, the location accuracy of the conventional AE analyser was improved by an order of magnitude. The use of… CONTINUE READING
Citations
Publications citing this paper.
SHOWING 1-10 OF 41 CITATIONS
Health Monitoring of FRP using Acoustic Emission and Fibre Optic Techniques
VIEW 5 EXCERPTS
CITES BACKGROUND
HIGHLY INFLUENCED
AE Source Orientation by Plate Wave Analysis
VIEW 9 EXCERPTS
CITES BACKGROUND & METHODS
HIGHLY INFLUENCED
Source Orientation by Plate Wave Analysis *
VIEW 9 EXCERPTS
CITES METHODS & BACKGROUND
The Propagation Characteristics of the Plate Modes of Acoustic Emission Waves in Thin Aluminum Plates and Thin Graphite/Epoxy Composite Plates and Tubes
VIEW 4 EXCERPTS
CITES BACKGROUND
HIGHLY INFLUENCED
Damage monitoring of carbon fibre reinforced composites using acoustic emission
VIEW 8 EXCERPTS
CITES BACKGROUND
HIGHLY INFLUENCED
Plate Mode Velocities in Graphite/Epoxy Plates
VIEW 4 EXCERPTS
CITES METHODS
Advanced waveform-based acoustic emission detection of matrix cracking in composites
VIEW 6 EXCERPTS
CITES METHODS, BACKGROUND & RESULTS
HIGHLY INFLUENCED
Propagation of Flexural Mode AE Signals in GR/Ep Composite Plates
VIEW 4 EXCERPTS
CITES METHODS