Pärt

@article{Skipp2013Prt,
  title={P{\"a}rt},
  author={Benjamin Skipp},
  journal={Tempo},
  year={2013},
  volume={67},
  pages={99 - 100}
}
: The main building materials widely used worldwide are those based on cement, glass, and ceramics. Taking into account the fact that the raw material base for the production of these materials is narrowing, and the quality of raw materials is declining, methods are being used to modify the structure of silicate materials in order to improve their properties when using cheaper raw materials and industrial waste, which should help reduce the energy intensity of their production. One of the ways… 

Mechanical and Tribological overview of ceramic particulates reinforced aluminium alloy composites

Abstract This review manuscript highlights the effects of various ceramic particulates on different aspects like tribo-logical (sliding wear), mechanical and thermal behaviour etc. of aluminium alloy

Characterization and modelling of the mechanical properties of mineral wool

Mineral wool designates a highly porous network of fibres drawn by spinning molten minerals. Traditionally, mineral wool products have found application as thermal and acoustic insulation of

Electrostatic separator for micronized mixtures of metals and plastics originating from waste electric and electronic equipment

In spite of their extensive use for processing mixtures of granules exceeding 1 mm in size, very few industrial electrostatic separators are capable of handling micronized metals and plastics

Influence of Magnesia on Demoulding Strength of Colloidal Silica-Bonded Castables

Abstract The change in demoulding strength of colloidal silica-bonded castables with and without magnesia is investigated with emphasis on the relationship between the demoulding strength and

Preparation of UV-curing polymer-ZrO 2 hybrid nanocomposites via auto-hydrolysis sol-gel process using zirconium oxychloride octahydrate coordinated with organic amine

Compared with the conventional thermal curing technique for hybrid coatings, the UV-curing technique has several excellent features such as a high-speed process, lower energy consumption, lower

Nanomaterials in consumer's goods: the problems of risk assessment

Nanotechnology and engineered nanomaterials are currently used in wide variety of cosmetic products, while their use in food industry, packaging materials, household chemicals etc. still includes a

The surface properties of nanoparticles determine the agglomeration state and the size of the particles under physiological conditions

It is shown that the surface properties primarily determine the agglomeration state of the particles and therefore their effective size, especially under physiological conditions, and the biological identity of a nanomaterial is clearly influenced by differentiating surface properties.

The Influence of Adding Coarse Grain Phase on the Tribo-Wear Characteristics and Mechanical Properties of Ultra-Fine Grained Al-2Cu-B4C Trimodal Composite at Room Temperature

In this paper, it is intended to analyze the influence of coarse grain (CG) phase on mechanical properties and wear performance of Al–2Cu-4 wt% B4C trimodal composite. Trimodal ultra-fine grained
...

References

SHOWING 1-10 OF 96 REFERENCES

GEOLOGY AND PETROLOGY OF CHOKAI VOLCANO, NORTHEASTERN JAPAN, PART I, GEOLOGY AND PETROGRAPHY

Chokai volcano is the largest and highest (2230m) among the volcanoes belonging to the Chokai volcanic zone, and situated from 135•K50•ŒE to 140 •‹ 07•ŒE in Long. and from 39•‹15•ŒN to 39•‹00'N in

Lateral variation of basalt magma type across continental margins and Island Arcs

Quaternary basalt magmas in the Circum-Pacific belt and island arcs and also in Indonesia change continuously from less alkalic and more siliceous type (tholeiite) on the oceanic side to more alkalic

The early history of the Deccan

  • G. Yazdani
  • Political Science, History
    The Journal of Asian Studies
  • 1962
had been subordinated in matters of peace and war to the Supreme Council in Calcutta, under the terms of Lord North's Regulating Act of 1773. Without consulting Calcutta, the Bombay authorities

Ancient to medieval : South Indian society in transition

PREFACE ACKNOWLEDGEMENTS ABBREVIATIONS INTRODUCTION: EMERGENCE OF MEDIEVAL STATE AND SOCIAL FORMATION IN SOUTH INDIA SECTION 1: CHANGE IN LANDHOLDING AND PRODUCTION SYSTEM: 1. Kudininga-devadanam:

Social formations of early South India

PREFACE ACKNOWLEDGEMENTS INTRODUCTION 1. Early Social Formations: A Historiographic Review 2. Semiotics of Ancient Tamil Poetics: A Historiographic Consideration 3. Forms of Production and Forces of

A concise history of South India : issues and interpretations

Preface Prologue: Before Common Era: The Dravidian Issue by Noboru Karashima 1: Before Common Era (2): Beginning of South Indian history 1.1 Pre-historic cultures by P. Shanmugam 1.2 Megalithic

Rethinking Early Medieval India: A Reader

Preface Acknowledgements Introduction by Upinder Singh Part I: Alternative Models and Political Frameworks: Chapter 1. The Nature of Indian Feudalism by R.S. Sharma Chapter 2. The Segmentary State:

AN ANALYSIS OF THE RELATIONSHIP BETWEEN LANGUAGE ATTITUDES AND ENGLISH ATTAINMENT OF SECONDARY STUDENTS IN HONG KONG

This study analyzes the relationship between English language attainment and attitudes towards English among Chinese-speaking (Canton dialect) secondary school students in Hong Kong. The subjects

Architecture and art of the Deccan sultanates

Introduction 1. Historical framework 2. Forts and palaces 3. Mosques and tombs 4. Architectural decoration 5. Miniature painting: Ahmadnagar and Bijnapur 6. Miniature painting: Golconda and other
...