Optimizing the Cutting Parameters for Better Surface Quality in 2 . 5 D Cutting Utilizing Titanium Coated Carbide Ball End Mill

@inproceedings{Pa2012OptimizingTC,
  title={Optimizing the Cutting Parameters for Better Surface Quality in 2 . 5 D Cutting Utilizing Titanium Coated Carbide Ball End Mill},
  author={N. Pa and Ahmed A. D. Sarhan and Mohd Hamdi Abd Shukor},
  year={2012}
}
1 Universiti Kuala Lumpur, Institute of Product Design and Manufacturing, Cheras, Kuala Lumpur, Malaysia, 56100 2 Department of Mechanical Engineering, Faculty of Engineering, Assiut University, Assiut, Egypt, 71516 3 Centre of Advanced Manufacturing and Material Processing, Department of Engineering Design and Manufacture, University of Malaya, Kuala Lumpur, Malaysia, 50603 # Corresponding Author / E-mail: masmiati@siswa.um.edu.my, TEL: +603-79677633, FAX: +603-79677669 

References

Publications referenced by this paper.
Showing 1-10 of 17 references

Influence of cutting parameters on tool wear and surface roughness in hard turning of AISI H11 tool steel using ceramic tools,

  • S. Saini, I. Ahuja, V. Sharma
  • Int. J. Precis. Eng. Manuf.,
  • 2012

Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces,

  • A.A.D. Sarhan, A. Matsubara
  • Materials and Manufacturing Processes,
  • 2011

Investigation of cutting parameters effect for minimization of sur face roughness in internal turning,

  • M. Munawar, Chen, J.-S, N. Mufti
  • Int. J. Precis. Eng. Manuf.,
  • 2011

Optimization of cutting conditions for surface roughness in CNC end milling,

  • K. Raju, G. Janardhana, P. Kumar, V. Rao
  • Int. J. Precis. Eng. Manuf.,
  • 2011

Optimization of cutting parameters for turning Al-SiC(10p) MMC using ANOVA and grey relational analysis,

  • R. Ramanujam, N. Muthukrishnan, R. Raju
  • Int. J. Precis. Eng. Manuf.,
  • 2011

Tool wear, chip formation and workpiece surface issues in CBN hard turning: A review,

  • M. Dogra, V. Sharma, A. Sachdeva, N. Suri, J. Dureja
  • Int. J. Precis. Eng. Manuf.,
  • 2010

Materials and Processes in Manufacturing,

  • J. T. Black, R. A. Kohser
  • 2008

Surface roughness optimization in an end-milling operation using the Taguchi design method,

  • J. Z. Zhang, J. C. Chen, E. D. Kirby
  • Journal of Materials Processing Technology,
  • 2007

Similar Papers

Loading similar papers…