Optimization of shape rolling sequences by integrated artificial intelligent techniques

@article{Lambiase2013OptimizationOS,
  title={Optimization of shape rolling sequences by integrated artificial intelligent techniques},
  author={Francesco Lambiase},
  journal={The International Journal of Advanced Manufacturing Technology},
  year={2013},
  volume={68},
  pages={443-452}
}
  • F. Lambiase
  • Published 19 January 2013
  • Computer Science
  • The International Journal of Advanced Manufacturing Technology
The present work introduces an expert system that automatically selects and designs rolling sequences for the production of square and round wires. The design strategy is aimed at reducing the overall number of passes assuming a series of process constraints, e.g., available roll cage power and torque, rolls groove filling behaviors, etc. The method is carried out into two steps: first a genetic algorithm is used to select the proper rolling sequence allowing to achieve a desired finished… 
Towards Energy Efficient Shape Rolling: Roll Pass Optimal Design and Case Studies
TLDR
This study attempts to establish a generic strategy based on hybrid modeling and an improved genetic algorithm, to support the optimizations of RPD and shape rolling operations at a systematic perspective and develops a tool based on the Matlab platform to demonstrate the optimal design operations.
Design and optimization of rolling mills pass based on parameterization and orthogonal test
The complex design of the duo cold-mill, especially the pass. Aiming at this challenge, a parametric mathematical model of the pass is established in the present study. The cold rolling process of 50
Metamodel-based optimization of hot rolling processes in the metal industry
To maximize the throughput of a hot rolling mill, the number of passes has to be reduced. This can be achieved by maximizing the thickness reduction in each pass. For this purpose, exact predictions
Process optimization of a non-circular drawing sequence based on multi-surrogate assisted meta-heuristic algorithms
TLDR
It was found that hybrid surrogate models can improve prediction accuracy compared to a single surrogate model and were found to be powerful in improving the delamination characteristics of the drawn wire and reducing the production cost.
Roll profile design for shaped wire rolling with high aspect ratio
For a shape rolling process of products with a high aspect ratio, its width does not spread sufficiently, frequently resulting in the unfilling phenomenon in the width direction. This paper proposes
Process parameter optimization for fused deposition modeling using response surface methodology combined with fuzzy inference system
TLDR
The proposed approach in this study can effectively improve accuracy and efficiency in the FDM process by focusing on process parameter optimization.
Prediction of geometrical profile in slit rolling pass
In the shape rolling process, the reduction of the number of passes is a challenging topic for the steel industry. This can be achieved by enhancing the design approach or by developing new rolling
Mechanical behaviour of friction stir spot welds of polycarbonate sheets
The present investigation is aimed at analyzing the influence of the processing speeds and processing times on mechanical behaviour of friction stir spot welding (FSSW) joints produced on
...
1
2
3
...

References

SHOWING 1-10 OF 34 REFERENCES
Optimization of oval-round pass design using genetic algorithm
A knowledge-based expert system for roll pass and profile design for shape rolling of round and square bars
Optimal Design of Process Variables in Multi-Pass Wire Drawing by Genetic Algorithms
This paper describes a new method for design optimization of process variables in multi-pass wire drawing processes. An adaptive Micro Genetic Algorithm (μGA) has been implemented for minimizing the
Development of energy-saving optimization for the oval-edging oval pass design using genetic algorithm
In the multi-pass rod rolling systems, where the final products are round bars with different sizes, oval-edging oval passes are widely employed as intermediate passes. This study attempts to present
Interactive computer-aided-design system for roll pass and profile design in bar rolling
Automated Procedure for Roll Pass Design
TLDR
This approach permitted a geometrical optimization of roll passes while allowing automation of the roll pass design process, and the heuristic nature of the inferential engine contributes a great deal toward reducing search time, thus allowing such a system to be employed for industrial purposes.
Optimization of roll profiles in the hot rolling of wide steel strip
TLDR
A possible approach using computational intelligence methods are neural networks and genetic algorithms that could be used in a wide range of combinatorial optimization problems of technical systems.
Modeling of manufacturing processes with ANNs for intelligent manufacturing
Dimensional analysis in steel rod rolling for different types of grooves
Sequence design for shape-rolling processes consists of roll pass and profile design, i.e., transforming the billet into a final shape. For the prediction of the mean effective strain of the
Integration of batching and scheduling for hot rolling production in the steel industry
This paper investigates the hot rolling production scheduling problem in the steel industry and proposes a new mixed integer programming model for this problem based on the monolithic modeling
...
1
2
3
4
...