Optical and surface properties of oxyfluoride glass

@inproceedings{Nee2000OpticalAS,
  title={Optical and surface properties of oxyfluoride glass},
  author={Soe-Mie F. Nee and Linda F. Johnson and Mark B. Moran and Joni M. Pentony and Steven M. Daigneault and Danh C. Tran and Kenneth W. Billman and Sadegh Siahatgar},
  booktitle={SPIE Optics + Photonics},
  year={2000}
}
Using conventional materials like fused silica and sapphire for critical window components in a high-power laser system can lead to intolerable thermal distortions and optical path difference effects. A new oxyfluoride glass is being developed which has the unique property of possessing a negative thermo-optic coefficient (dn/dT) in the near- and mid-wave infrared. Specifically, the refractive index (n) of oxyfluoride glass decreases as the temperature increases. The distortions caused by… Expand
2 Citations
The effect of TiO2 thin film on AC electrical properties of Nano porous silicon substrate
The AC electrical behaviour of nano porous silicon (PSi) with TiO2 thin films was examined over the range of frequency 10 2 to 10 5 Hz. Porous silicon (PSi) layers were obtained by electrochemicalExpand
Progress toward an athermal HEL optical window
Progress in the development phases of a new optical material that exhibits very low thermal lensing and robustness against thermal shock will be reported. Material, thermal, and optical properties ofExpand

References

SHOWING 1-8 OF 8 REFERENCES
Measurement of the refractive index of transparent materials using null polarimetry near Brewster's angle
  • S. Nee
  • Materials Science, Engineering
  • Optics & Photonics
  • 1998
The nondestructive measurement of refractive index of transmissive materials using null polarimetry is simple, accurate and does not require much on sample preparation. In null polarimetry, theExpand
Ellipsometric Characterization Of Optical Constants For Transparent Materials
Ellipsometric parameters v and A for glass samples were measured at multiple angles of incidence using an infrared ellipsometer in the null mode. The Fresnel equations were fit to the data using aExpand
Handbook of Optical Constants of Solids
VOLUME ONE: Determination of Optical Constants: E.D. Palik, Introductory Remarks. R.F. Potter, Basic Parameters for Measuring Optical Properties. D.Y. Smith, Dispersion Theory, Sum Rules, and TheirExpand
Properties of Optical and Laser-Related Materials
This book presents a very concise compilation of physical parameters of many `classical' and `novel' optical materials, laser-active ones included. Until now, there has been no comparable data sourceExpand
Simple high-precision extinction method for measuring refractive index of transparent materials
Linearly polarized light remains linearly polarized after reflection from a transparent material at oblique incidence. The reflected polarization angle is determined from the extinction position ofExpand
Interspecimen Comparison of the Refractive Index of Fused Silica
The index of refraction of optical quality fused silica (SiO2) was determined for 60 wavelengths from 0.21 to 3.71 μ at 20°C. The dispersion equationExpand
Accurate null polarimetry for measuring the refractive index of transparent materials
Simple null polarimetry is introduced to measure the refractive index n of transparent and semitransparent materials. For a linearly polarized incident light, the reflected polarization can be usedExpand
Scattering from Infrared Missile Domes
An automated system for scanning missile domes under computer control at an arbitrary number of points and determining both forward scattering and transmittance from 0° to over 60° from the dome axisExpand