Numerical analysis of the temperature distribution and Offline programming of industrial robot for thermal spraying Final Thesis
@inproceedings{Frutos2009NumericalAO,
title={Numerical analysis of the temperature distribution and Offline programming of industrial robot for thermal spraying Final Thesis},
author={A. de Frutos},
year={2009}
}Figures and Tables from this paper
figure 1.2 
figure 1.3 
figure 2.1 
table 2.1 
figure 2.10 
figure 2.2 
table 2.2 
figure 2.3 
figure 2.5 
figure 2.7 
figure 2.9 
figure 3.1 
table 3.1 
figure 3.12 
figure 3.13 
figure 3.2 
figure 3.3 
figure 3.4 
figure 3.5 
figure 3.6 
figure 3.7 
figure 3.8 
figure 3.9 
figure 4.1 
table 4.1 
figure 4.10 
figure 4.11 
figure 4.12 
figure 4.13 
figure 4.15 
figure 4.16 
figure 4.17 
figure 4.18 
figure 4.19 
figure 4.2 
figure 4.20 
figure 4.21 
figure 4.22 
figure 4.23 
figure 4.24 
figure 4.25 
figure 4.26 
figure 4.27 
figure 4.28 
figure 4.29 
figure 4.3 
figure 4.30 
figure 4.31 
figure 4.32 
figure 4.33 
figure 4.34 
figure 4.4 
figure 4.5 
figure 4.6 
figure 4.8 
figure 4.9 
figure 5.1 
table 5.1 
figure 5.10 
figure 5.11 
figure 5.12 
figure 5.14 
figure 5.15 
figure 5.16 
figure 5.17 
figure 5.2 
table 5.2 
figure 5.3 
table 5.3 
figure 5.4 
table 5.4 
figure 5.5 
table 5.5 
figure 5.6 
table 5.6 
figure 5.7 
table 5.7 
figure 5.8 
table 5.8 
figure 6.1 
figure 6.2 
figure 6.3 
figure 6.4 
figure 6.5 
figure 6.6 
figure 6.7 
figure 6.8 
table A.5
One Citation
Diagnostic et adaptation des trajectoires robotiques en projection thermique
- Physics
- 2010
Robots manipulateurs sont couramment utilises pour la projection thermique, qui peuvent etre programmes de deux facons : par apprentissage et par la programmation hors-ligne. La programmation par…
References
SHOWING 1-10 OF 48 REFERENCES
The Theory and Application of the HVOF (High Velocity Oxi-fuel)
- DCU School of Mechanical & Manufacturing Engineering Website,
- 2003
Handbook of thermal spray
- ASM International
- 2004
The Mechanics of Serial and Parallel Manipulators; Robot analysis
- 1999
Off-Line Programming for Spraying and Laser Cladding of Three-Dimensional Surfaces
- Materials ScienceThermal Spray 2004: Proceedings from the International Thermal Spray Conference
- 2004
The economic efficiency of spraying a frequently changing spectrum of parts is strongly dependent on the costs of planning the spray process. In many cases, the robot program for coating a…
"J."
- PhilosophyThe New Yale Book of Quotations
- 2021
however (for it was the literal soul of the life of the Redeemer, John xv. io), is the peculiar token of fellowship with the Redeemer. That love to God (what is meant here is not God’s love to men)…
Introduction to robotics: Mechanics and control (second edition): by J.J. Craig, Addison-Wesley, Wokingham, 1989. ISBN 0-201-09528-9, xiii + 450 pages, hardcover, £18.95
- Computer Science, Materials Science
- 1991
Comparison between plasma- and HVOF-sprayed ceramic coatings. Part II: tribological behaviour
- Materials Science
- 2007
This is the second part of comparative study between High Velocity Oxygen-Fuel (HVOF) flame-sprayed and Atmospheric Plasma-Sprayed (APS) ceramics. Dry particles abrasion test and dry sliding wear…
Analysis and optimization of the HVOF process by combined experimental and numerical approaches
- Materials Science
- 2008
The Science and Engineering of Thermal Spray Coatings
- Materials Science
- 1995
Preface to the Second Edition. Preface to the First Edition. Acronyms, Abbreviations and Symbols. 1 Materials Used for Spraying. 1.1 Methods of Powders Production. 1.1.1 Atomization. 1.1.2 Sintering…