New developments in laser-heated diamond anvil cell with in situ synchrotron x-ray diffraction at High Pressure Collaborative Access Team.

  title={New developments in laser-heated diamond anvil cell with in situ synchrotron x-ray diffraction at High Pressure Collaborative Access Team.},
  author={Yue Meng and Rostislav Hrubiak and Eric Rod and Reinhard Boehler and Guoyin Shen},
  journal={The Review of scientific instruments},
  volume={86 7},
An overview of the in situ laser heating system at the High Pressure Collaborative Access Team, with emphasis on newly developed capabilities, is presented. Since its establishment at the beamline 16-ID-B a decade ago, laser-heated diamond anvil cell coupled with in situ synchrotron x-ray diffraction has been widely used for studying the structural properties of materials under simultaneous high pressure and high temperature conditions. Recent developments in both continuous-wave and modulated… 

New developments in high-pressure X-ray diffraction beamline for diamond anvil cell at SPring-8

An overview of the recently renovated high-pressure X-ray diffraction (XRD) BL10XU beamline for the diamond anvil cell at SPring-8 is presented. The renovation includes the replacement of the X-ray

Laser heating setup for diamond anvil cells for in situ synchrotron and in house high and ultra-high pressure studies

The diamond anvil cell (DAC) technique combined with laser heating is one of the major methods for studying materials at high pressure and high temperature conditions. In this work, we present a

A Practical Review of the Laser-Heated Diamond Anvil Cell for University Laboratories and Synchrotron Applications

In the past couple of decades, the laser-heated diamond anvil cell (combined with in situ techniques) has become an extensively used tool for studying pressure-temperature-induced evolution of

A CO2 laser heating system for in situ high pressure-temperature experiments at HPCAT.

A CO2 laser heating setup for synchrotron x-ray diffraction inside a diamond anvil cell at HPCAT is presented, which is modular and portable between the H PCAT experiment hutches and demonstrates the improved room-temperature diffraction data quality afforded by annealing with the CO2 lasers.

Laser heated diamond anvil cell facility for high temperature high pressure research: application to material synthesis and melting studies

Laser-heated diamond anvil cell (LHDAC) technique is a unique and powerful experimental tool for studying the phase behaviour of materials at thermodynamic conditions comparable to the Earth’s deep

High-pressure studies with x-rays using diamond anvil cells

  • G. ShenH. Mao
  • Physics
    Reports on progress in physics. Physical Society
  • 2017
The essential concept of diamond anvil cell technology, together with recent developments and its integration with other extreme environments, are introduced and an overview of the latest developments in HP synchrotron techniques, their applications, and current problems are provided.

High-pressure studies with x-rays using diamond anvil cells

Pressure profoundly alters all states of matter. The symbiotic development of ultrahighpressure diamond anvil cells, to compress samples to sustainable multi-megabar pressures; and synchrotron x-ray

Laser-heating system for high-pressure X-ray diffraction at the Extreme Conditions beamline I15 at Diamond Light Source

A double-sided, off-axis laser-heating system for monochromatic X-ray diffraction experiments using a diamond anvil cell has been installed at beamline I15 at Diamond Light Source. Measurements of

Portable double-sided pulsed laser heating system for time-resolved geoscience and materials science applications.

A portable double-sided pulsed laser heating system for diamond anvil cells has been developed that is able to stably produce laser pulses as short as a few microseconds with repetition frequencies

A laser heating facility for energy-dispersive X-ray absorption spectroscopy.

A double-sided laser heating setup for diamond anvil cells installed on the ID24 beamline of the ESRF for energy-dispersive X-ray absorption spectroscopic (XAS) studies of materials under extreme pressure and temperature conditions is presented.



Double-sided laser heating system at HPCAT for in situ x-ray diffraction at high pressures and high temperatures

  • Y. MengG. ShenH. Mao
  • Physics, Materials Science
    Journal of physics. Condensed matter : an Institute of Physics journal
  • 2006
An overview of a YLF:Nd laser heating system at the undulator x-ray diffraction station (16ID-B) of the high-pressure collaborative access team (HPCAT) of the Advanced Photon Source is presented.

Laser heated diamond cell system at the Advanced Photon Source for in situ x-ray measurements at high pressure and temperature

We describe a laser heated diamond anvil cell system at the GeoSoilEnviroCARS sector at the Advanced Photon Source. The system can be used for in situ x-ray measurements at simultaneously ultrahigh

Advanced flat top laser heating system for high pressure research at GSECARS: application to the melting behavior of germanium

Laser heating plays an essential role for in-situ high pressure high temperature studies into the physical and chemical properties of materials in the diamond anvil cell (DAC) and minerals at

The birth and development of laser heating in diamond anvil cells

In 1968 Taro Takahashi and I observed a phase transition that resulted from laser heating under pressure in a diamond anvil cell. Using a ruby laser, we successfully converted graphite to diamond. We

Stability and crystal structure of MgSiO3 perovskite to the core‐mantle boundary

We report in situ angle‐dispersive X‐ray diffraction measurements for MgSiO3 at 90–118 and 135–144 GPa and 300–2900 K. At 90–144 GPa, we observed a new diffraction peak at 2.57–2.62 Å as reported in

Structure of liquid iron at pressures up to 58 GPa.

The data demonstrate that liquid iron at high pressures is a close-packed hard-sphere liquid, and place important constraints on the thermodynamic and transport properties of liquid iron and the melting curve of iron.

Discovery of the recoverable high-pressure iron oxide Fe4O5

The discovery of an iron oxide with formula Fe4O5, synthesized at high pressure and temperature, which has strong ferrimagnetic character comparable to magnetite and is a plausible accessory mineral of the Earth’s upper mantle.

Silicate perovskite from phase transformations of pyrope‐garnet at high pressure and temperature

Both natural and synthetic pyrope have been compressed to pressures above 300 kbar in a diamond-anvil press and heated to temperatures above 800°C by a continuous YAG laser. After quenching and

Iron-rich silicates in the Earth's D'' layer.

  • W. MaoY. Meng H. Mao
  • Geology
    Proceedings of the National Academy of Sciences of the United States of America
  • 2005
High-pressure experiments and theoretical calculations demonstrate that an iron-rich ferromagnesian silicate phase can be synthesized at the pressure-temperature conditions near the core-mantle boundary, responsible for the unusual geophysical and geochemical signatures observed at the base of the lower mantle.

Temperatures in the Earth's core from melting-point measurements of iron at high static pressures

THE temperature distribution in the Earth's core places important constraints on the Earth's internal heat budget and on models of the geodynamo. The solid inner core crystallizes from a liquid outer