Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries

@article{Poizot2000NanosizedTO,
  title={Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries},
  author={Philippe Poizot and St{\'e}phane Laruelle and Sylvie Grugeon and Loic Dupont and Jean Marie Tarascon},
  journal={Nature},
  year={2000},
  volume={407},
  pages={496-499}
}
Rechargeable solid-state batteries have long been considered an attractive power source for a wide variety of applications, and in particular, lithium-ion batteries are emerging as the technology of choice for portable electronics. One of the main challenges in the design of these batteries is to ensure that the electrodes maintain their integrity over many discharge–recharge cycles. Although promising electrode systems have recently been proposed, their lifespans are limited by Li-alloying… Expand
View on Springer
ncbi.nlm.nih.gov
6,547 Citations
Highly Influential Citations
28
Background Citations
258
Methods Citations
14
Results Citations
5

6,547 Citations

Citation Type

Citation Type

Microwave-assisted hydrothermal synthesis of magnetite nanoparticles with potential use as anode in lithium ion batteries
Rechargeable solid-state batteries have long been considered an attractive power source for a wide variety of applications, and in particular, lithium-ion batteries are emerging as the technology of… Expand
Surface-Coverage-Dependent Cycle Stability of Core-Shell Nanostructured Electrodes for Use in Lithium Ion Batteries
Li ion batteries are widely utilized as rechargeable energy sources for compact electronics and portable devices. Recently, a dramatic increase in the use of smartphones and hand-held tablet devices… Expand
Novel Composite Anodes Consisting of Lithium Transition-Metal Nitrides and Transition Metal Oxides for Rechargeable Li-Ion Batteries
Lithium transition-metal nitrides are promising anode candidates for Li-ion batteries. However, lithium must be extracted from the nitrides in an initial anodic oxidation, indicating these compounds… Expand
High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications
TLDR
A two-step electrode design consisting of the electrochemically assisted template growth of Cu nanorods onto a current collector followed by electrochemical plating of Fe3O4 is used, which demonstrates a factor of six improvement in power density over planar electrodes while maintaining the same total discharge time. Expand
High capacity conversion anodes in Li-ion batteries: A review
Abstract The structures and properties of high capacity conversion electrodes are key factors as these undergo successive lithium insertion and conversion during an electrochemical process in the… Expand
Cu-Si nanocable arrays as high-rate anode materials for lithium-ion batteries.
TLDR
It is suggested that the application of nanocable structures in LIBs electrodes can signifi cantly improve the batteries’ electrochemical performance, especially the high-performance lithium-ion batteries. Expand
Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries.
TLDR
This feature article aims to stress the importance of proper nanostructuring and advanced compositing that would result in improved physicochemical properties of metal oxides, thus making them promising negative electrodes for next-generation LIBs. Expand
Recent Progress in Polyanionic Anode Materials for Li (Na)-Ion Batteries
In recent years, rechargeable lithium-ion batteries (LIBs) have become widely used in everyday applications such as portable electronic devices, electric vehicles and energy storage systems. Despite… Expand
Metal oxides as negative electrode materials in Li-ion cells
The electrochemical performance of 3d metal oxide (MO) electrode materials for Li-ion batteries was studied in the form of Li/CoO(Co 3 O 4 ) half-cells. Reversible capacity in the 750-1000 mAh/g… Expand
Hierarchically Nanostructured Transition Metal Oxides for Lithium‐Ion Batteries
TLDR
The research progress on the synthesis methods, morphological characteristics, and electrochemical performances of hierarchically nanostructured TMOs for LIBs is summarized and discussed. Expand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 23 REFERENCES
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
A high-capacity lithium-storage material in metal-oxide form has been synthesized that can replace the carbon-based lithium intercalation materials currently in extensive use as the negative… Expand
Li x Cu6Sn5 ( 0 < x < 13 ) : An Intermetallic Insertion Electrode for Rechargeable Lithium Batteries
It has been discovered that lithium can be inserted into the intermetallic compound in a two‐phase reaction to yield the product . This finding has important implications for designing new… Expand
CoO2, the end member of the LixCoO2 solid solution
While has been widely studied in the past 15 years as a promising positive electrode material in lithium‐ion batteries, suprisingly, many questions are still unanswered concerning the electrochemical… Expand
Lithium secondary batteries using a lithium cobalt nitride, Li2.6Co0.4N, as the anode
Abstract Lithium cobalt nitride, Li 2.6 Co 0.4 N, has a high capacity of 900 mAh/g with good cycle performance in lithium deintercalation and intercalation. The good reversibility and low potential… Expand
Study of Li3 − xMxN (M: Co, Ni or Cu) system for use as anode material in lithium rechargeable cells
We have investigated the Li3 − xMxN (M: Co, Ni, or Cu, x = 0.1−0.6) system as an anode material for lithium rechargeable cells. Li metalLi3 − xMxN cells were prepared and the anode properties… Expand
Rechargeable Li1 + x Mn2 O 4 / Carbon Cells with a New Electrolyte Composition Potentiostatic Studies and Application to Practical Cells
To improve the high temperature performance of Li[sub 1+x]Mn[sub 2]O[sub 4]/carbon rocking-chair secondary batteries the authors searched for and identified a new electrolyte composition whose range… Expand
Synthesis and electrochemical properties of amorphous vanadates of general formula RVO{sub 4} (R = In, Cr, Fe, Al, Y) vs. Li
A method is described for the low-temperature preparation of amorphous vanadates of general formula RVO{sub 4} (R = In, Cr, Fe, Al, Y), and their electrochemical properties vs. Li are reported. A… Expand
Mechanically Alloyed Sn‐Fe(‐C) Powders as Anode Materials for Li‐Ion Batteries: I. The Sn2Fe ‐ C System
The authors have prepared intermetallic phases and mixtures of such phases in the Sn-Fe-C Gibbs triangle by mechanical alloying methods or by direct melting. This second paper in a three-part series… Expand
On the Aggregation of Tin in SnO Composite Glasses Caused by the Reversible Reaction with Lithium
We show that the reaction mechanism in Li/[SnO:(B 2 O 3 ) x :(P 2 O 5 ) y glass (0.1≤x,y≤0.5)], Li/[SnO: B 2 O 3 ) 0.5 :(P 2 O 5 ) 0.5 :(K 2 CO 3 ) 0.04 glass] and Li/SnO cells is common. During the… Expand
Li{sub x}Cu{sub 6}Sn{sub 5} (0
It has been discovered that lithium can be inserted into the intermetallic compound Cu{sub 6}Sn{sub 5} in a two-phase reaction to yield the product Li{sub x}Cu{sub 6}Sn{sub 5} (x{approx}13). This… Expand
...
1
2
3
...