Nano Power Current Reference Circuit consisting of Sub-threshold CMOS Circuits

@inproceedings{Kushwaha2017NanoPC,
  title={Nano Power Current Reference Circuit consisting of Sub-threshold CMOS Circuits},
  author={D. Kushwaha and D. Mishra},
  year={2017}
}
This paper proposes a low voltage CMOS Nano power current reference circuit and presents its performance with circuit simulation in 180nm UMC CMOS technology. The proposed circuit consists of start-up, Bias-voltage, currentsource sub-circuits with most of the MOSFETs operating in sub-threshold region. Simulation results shows that the circuit generates a stable reference current of 4-nA in supply voltage range 1 V1.8 V with line sensitivity of .The temperature coefficient of the current was at… Expand

Figures and Tables from this paper

References

SHOWING 1-10 OF 22 REFERENCES
Current Reference Circuit for Subthreshold CMOS LSIs
Fig. 1. Schematic of the proposed current reference circuit. Intelligent network systems for the future will require a great number of smart sensor LSIs that measure various physical data inExpand
A 2-nW 1.1-V self-biased current reference in CMOS technology
TLDR
Simulated and experimental results validate the design and show that the current source can operate at supply voltages down to 1.1 V with a good regulation in a 1.5-/spl mu/m technology. Expand
A new NMOS temperature-stable voltage reference
An NMOS voltage reference has been developed that exhibits extremely low drift with temperature. The reference is based on the difference between the gate/source voltages of enhancement andExpand
A CMOS temperature-compensated current reference
A temperature-compensated current reference for CMOS integrated circuits based on a MOSFET as current-defining element, is described. To minimize the mass-production cost, it uses no externalExpand
A 300 nW, 15 ppm/$^{\circ}$C, 20 ppm/V CMOS Voltage Reference Circuit Consisting of Subthreshold MOSFETs
TLDR
A low-power CMOS voltage reference was developed using a 0.35 mum standard CMOS process technology and would be suitable for use in subthreshold-operated, power-aware LSIs. Expand
CMOS Current Reference without Resistance
  • H. Oguey, D. Aebischer
  • Materials Science
  • ESSCIRC '96: Proceedings of the 22nd European Solid-State Circuits Conference
  • 1996
A micropower current reference can be built with CMOS transistors only. It shows low sensitivity with respect to technology, supply voltage and temperature, and it works on very low supply voltages.Expand
MOS Voltage Reference based on Polysilicon Gate Work Function Difference
TLDR
An adaptation of bandgap references known in bipolar technology and the ability of two MOS transistors of the same conductivi¬ ty type but having different flatband voltages to be obtained. Expand
Design Of Analog Cmos Integrated Circuits
TLDR
The design of analog cmos integrated circuits is universally compatible with any devices to read and is available in the book collection an online access to it is set as public so you can download it instantly. Expand
References
  • 1971
11. Brunck W: Die systematische untersuchung des sprachorgans bei angeborenen gaumendefekte. Diss Leipiz 1906 (from Meissner). 12. Commichau G, Oeken FW: Pneumatisationsverhaitnisse belExpand
Micropower energy scavenging
More than a decade of research in the field of thermal, motion, and vibrational energy scavenging has yielded increasing power output and smaller embodiments. Power management circuits forExpand
...
1
2
3
...