Multipoint Full-Wave Model Order Reduction for Delayed PEEC Models With Large Delays

@article{Ferranti2011MultipointFM,
  title={Multipoint Full-Wave Model Order Reduction for Delayed PEEC Models With Large Delays},
  author={Francesco Ferranti and Michel S. Nakhla and Giulio Antonini and Tom Dhaene and Luc Knockaert and Albert E. Ruehli},
  journal={IEEE Transactions on Electromagnetic Compatibility},
  year={2011},
  volume={53},
  pages={959-967}
}
The increase of operating frequencies requires 3-D electromagnetic (EM) methods, such as the partial element equivalent circuit (PEEC) method, for the analysis and design of high-speed circuits. Very large systems of equations are often produced by 3-D EM methods and model order reduction (MOR) techniques are used to reduce such a high complexity. When signal waveform rise times decrease and the corresponding frequency content increases, or the geometric dimensions become electrically large… Expand

Figures and Tables from this paper

Interpolation-Based Parameterized Model Order Reduction of Delayed Systems
Three-dimensional electromagnetic methods are fundamental tools for the analysis and design of high-speed systems. These methods often generate large systems of equations, and model order reductionExpand
Partitioned Model Order Reduction of Partial Element Equivalent Circuit Models
  • D. Romano, G. Antonini
  • Mathematics
  • IEEE Transactions on Components, Packaging and Manufacturing Technology
  • 2014
As very large scale integration circuit speeds and density continue to increase, 3-D electromagnetic methods have become essential for the analysis, design, and verification of high-speed systems.Expand
Taylor Series Expansion-Based PEEC Time Domain Solver for Transient Full-Wave Analysis
TLDR
The Taylor series expansion is used to manage the delays leading to an augmented PEEC time-domain solver and results obtained show that the proposed method is accurate and yields good performances. Expand
Model Order Reduction of Time-Delay Systems Using a Laguerre Expansion Technique
TLDR
A higher order Krylov subspace algorithm for model order reduction of time-delay systems based on a Laguerre expansion technique is proposed and validated by means of real world numerical examples. Expand
Parameterized Model Order Reduction of Delayed PEEC Circuits
In this paper, we propose a novel parameterized model order reduction technique for circuits described by the delayed partial element equivalent circuit method. The moment vectors associated withExpand
A Passive Full-Wave Micromodeling Circuit for Packaging and Interconnection Problems
A passive full-wave micromodeling circuit (FW-MMC) is proposed for high-speed/frequency interconnection problems. The circuit is derived from an FW generalized partial element equivalent circuitExpand
Direct Mesh-Based Model Order Reduction of PEEC Model for Quasi-Static Circuit Problems
In this paper, a new concept of matrix-inversion-less derived physically expressive circuit method of model order reduction for large-scale high-speed/microwave circuit problems is proposed. It isExpand
Multiorder Arnoldi Approach for Model Order Reduction of PEEC Models With Retardation
  • E. Rasekh, A. Dounavis
  • Mathematics
  • IEEE Transactions on Components, Packaging and Manufacturing Technology
  • 2012
This paper presents an efficient algorithm to create reduced-order models of large linear networks that contain delay elements. The proposed algorithm is based on a multiorder Arnoldi algorithm usedExpand
A Hybrid PEEC–SPICE Method for Time-Domain Simulation of Mixed Nonlinear Circuits and Electromagnetic Problems
TLDR
A novel technique to simulate combined linear/nonlinear circuit and EM problems in time domain and employs OrCAD as the circuit solver, which shows the feasibility of the developed method to solve this type of mixed problems. Expand
Gramian-based model order reduction of parameterized time-delay systems
TLDR
This paper derives parameterized reduced-order models (ROMs) for TDSs using balanced truncation by approximating the Gramians in the multi-dimensional space of parameters to preserve parametric dependence during the MOR procedure. Expand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 38 REFERENCES
Using partial element equivalent circuit full wave analysis and Pade Via Lanczos to numerically simulate EMC problems
  • R. D. Slone, W. T. Smith, Z. Bai
  • Computer Science
  • IEEE 1997, EMC, Austin Style. IEEE 1997 International Symposium on Electromagnetic Compatibility. Symposium Record (Cat. No.97CH36113)
  • 1997
TLDR
The particular PEEC modeling approach used to form the system matrices is outlined and a PVL algorithm which incorporates a measure of the error between the actual system response and the approximate system response is used to evaluate the PEEC models. Expand
A method for reduced-order modeling and simulation of large interconnect circuits and its application to PEEC models with retardation
TLDR
This paper uses multiple expansion points, and piecemeal construction of pole-residue approximations to transfer functions of the PEEC systems, as was used in the complex frequency hopping algorithms, and presents a practical, readily parallelizable procedure for generating reduced-order frequency-domain models from general full wavePEEC systems. Expand
Full-wave PEEC time-domain method for the modeling of on-chipinterconnects
TLDR
It is shown that a full-wave partial element equivalent circuit method, which includes the delays among the partial elements, leads to an efficient solver enabling the analysis of large meaningful problems for realistic very large scale integration wiring problems. Expand
Segregation by primary phase factors: a full-wave algorithm for model order reduction
TLDR
SPPF, an algorithm for FMOR enabling wideband interconnect impedance analysis that extracts exponential terms (primary phase factors) and then approximates the smoother remainder with ETAS, thus resulting in good accuracies over a very wide band of frequencies. Expand
Nonorthogonal PEEC formulation for time- and frequency-domain EM and circuit modeling
Electromagnetic solvers based on the partial element equivalent circuit (PEEC) approach have proven to be well suited for the solution of combined circuit and EM problems. The inclusion of all typesExpand
Hybrid electromagnetic modeling of noise interactions in packaged electronics based on the partial-element equivalent-circuit formulation
The partial-element equivalent-circuit (PEEC) method is used to develop a flexible, hierarchical electromagnetic modeling and simulation environment for the analysis of noise generation and signalExpand
Generating compact, guaranteed passive reduced-order models of 3-D RLC interconnects
As very large scale integration (VLSI) circuit speeds and density continue to increase, the need to accurately model the effects of three-dimensional (3-D) interconnects has become essential forExpand
Efficient full-wave electromagnetic analysis via model-order reduction of fast integral transforms
TLDR
It is demonstrated that an algorithm based on application of a novel model-order reduction scheme directly to the sparse model generated by a fast integral transform has significant advantages for frequency- and time-domain simulation. Expand
Generation of FDTD subcell equations by means of reduced order modeling
Adapted finite-difference time-domain (FDTD) update equations exist for a number of objects that are smaller than the grid step, such as wires and thin slots. We provide a technique thatExpand
PEEC Modeling of Dispersive and Lossy Dielectrics
In this paper a general formulation is presented for the time-domain partial element equivalent circuit method in a general dispersive medium. The formulation is based on Debye and Lorentz modelsExpand
...
1
2
3
4
...