Multiple-Loop Feedback Topologies for the Design of Low-Sensitivity Active Filters

@inproceedings{Laker1979MultipleLoopFT,
  title={Multiple-Loop Feedback Topologies for the Design of Low-Sensitivity Active Filters},
  author={K. Laker and R. Schaumann and M. Ghausi},
  year={1979}
}
Improved sensitivity performance of active filters in multiloop feedback (coupled) topologies is well known. Of the numerous design procedures available in the literature, in this paper those methods are reviewed which are based on first- or second-order building blocks in a feedback configuration. A statistical sensitivity measure is given which results in a realistic performance measure for the filters and which can be used to compare circuits and to optimize their design to achieve minimum… Expand
57 Citations
Practical design considerations for Coupled-Single-Amplifier-Biquad active bandpass filters
  • J. Tow
  • Engineering
  • The Bell System Technical Journal
  • 1983
Systematic design of multiple-loop feedback voltage-mode filters based on CCII
  • 1
Comparison of magnitude and delay sensitivity in IFLF and cascade g/sub m/-C filters
  • D. Chiang, R. Schaumann
  • Mathematics, Computer Science
  • ISCAS'99. Proceedings of the 1999 IEEE International Symposium on Circuits and Systems VLSI (Cat. No.99CH36349)
  • 1999
  • 3
Single Amplifier Bi-Quadratic Filter Topologies in Transimpedance Configuration
  • 5
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 48 REFERENCES
...
1
2
3
4
5
...