Molybdenum Adsorption on Oxides, Clay Minerals, and Soils

@article{Goldberg1996MolybdenumAO,
  title={Molybdenum Adsorption on Oxides, Clay Minerals, and Soils},
  author={Sabine Goldberg and H. S. Forster and Curtis L. Godfrey},
  journal={Soil Science Society of America Journal},
  year={1996},
  volume={60},
  pages={425-432}
}
Molybdenum adsorption behavior was investigated on various crystalline and x-ray amorphous Al and Fe oxide minerals, clay minerals, CaC@, and arid-zone calcareous and noncalcareou s ssoils. Molybdenum adsorption on botb Al and Fe oxides exhibited a maximum at low pH extending to about pH 4 to 5. Above pH 5 adsorption decreased rapidly, with little adsorptio noccurring above pH 8. Molybdenum adsorption was higher for the oxide minerals having higher specific surface area and lower crystallinity… 

Figures and Tables from this paper

Bromide Adsorption by Reference Minerals and Soils

Bromide, Br−, adsorption behavior was investigated on amorphous Al and Fe oxide, montmorillonite, kaolinite, and temperate and tropical soils. Bromide adsorption decreased with increasing solution pH

Assessing Molybdenum Adsorption onto an Industrial Soil and Iron Minerals

The processes affecting adsorption of molybdenum (Mo) in alkaline industrial soils are not well known, as most research on Mo fate and transport has focused on agricultural soils. In this work, we

Influence of Soil Solution Salinity on Molybdenum Adsorption by Soils

Molybdenum (Mo) adsorption on five arid-zone soils from California was investigated as a function of equilibrium solution Mo concentration (0-30 mg L−1), solution pH (4-8), and electrical

Molybdenum Adsorption by Volcanic Italian Soils

Abstract Molybdenum (Mo) adsorption was investigated on five soils from the Gauro and Roccamonfina volcanoes of Campania, a southern Italian volcanic region. The soils were characterized by different

Molybdenum Adsorption by Volcanic

Molybdenum (Mo) adsorption was investigated on five soils from the Gauro and Roccamonfina volcanoes of Campania, a southern Italian volcanic region. The soils were characterized by different degrees
...

Boron Adsorption on Aluminum and Iron Oxide Minerals1

Boron adsorption behavior was investigated on various crystalline and x-ray amorphous Al and Fe oxide minerals. Adsorption increased at low pH, exhibited a peak in the pH range 7 to 8, and decreased

Boron Adsorption Mechanisms on Oxides, Clay Minerals, and Soils Inferred from Ionic Strength Effects

Prediction of anion adsorption behavior is enhanced by understanding the adsorption mechanism. This study was conducted to evaluate ionic strength effects on B adsorption and to infer B adsorption

Boron Adsorption and Silicon Release by the Clay Minerals Kaolinite, Montmorillonite, and Illite1

Boron adsorption behavior on the clay minerals kaolinite, montmorillonite, and illite was investigated. Adsorption increased at low pH, exhibited a peak in the pH range 8 to 10, and decreased at high

MOLYBDENUM ADSORPTION BY ALUMINUM AND IRON OXIDES AND HUMIC ACID

It is hypothesized that soil adsorption properties can be estimated from contents and adsorption properties of individual soil components (additivity principle), if the data are consistent.

Molybdate sorption by oxides of aluminium and iron

The sorption of molybdate by goethite, hematite, bayerite and α-Al2O3 was studied as a function of molybdate concentration and pH. The sorption isotherms exhibited double sorption plateaus in which

Boron Adsorption on California Soils

Boron adsorption on 15 arid zone soil samples was investigated both as a function of equilibrium B concentration (0-100 g irr) and as a function of solution pH (5.5-11.5). Boron adsorption as a

THE SOLUBILITY OF MOLYBDENUM IN SIMPLIFIED SYSTEMS AND AQUEOUS SOIL SUSPENSIONS

Summary Studies of the precipitation of molybdate by ferric iron and aluminium show that ferric molybdate has minimum solubility at pH 2.7 and that it is less soluble than aluminium molybdate which

Molybdate sorption-desorption in soils treated with phosphate

Adsorption of Molybdate Anion (MoO42−) by Sodium-Saturated Kaolinite

Adsorption of Mo(VI) on 2-0.2-μm size fraction of sodium-saturated kaolinite at 25 ± 2°C and at a constant pH of 7.00 ± 0.05 was studied. The kaolinite sample was pretreated to remove any surface