Modeling of the behavior of a welded joint subjected to reverse bending moment at high temperature

  title={Modeling of the behavior of a welded joint subjected to reverse bending moment at high temperature},
  author={Alan R. S. Ponter and Huicui Chen},
Background. The paper is concerned with the modelling of the behaviour of welds when subjected to severe thermal and mechanical loads where the maximum temperature during dwell periods lies in the creep range. The methodology of the Life Assessment Method R5 is applied where the detailed calculations are carried out using the Linear Matching Method, with the objective of generating an analytic model. Method of Approach. The Linear Matching Method (LMM) has been developed to allow accurate… CONTINUE READING


Publications referenced by this paper.

PC/AGR/5087: Final report on the fatigue and creepfatigue behaviour of welded cruciform joints

  • I Bretherton, G Knowles, J PHayes, S KBate, C JAustin
  • Report RJCB/RD01186/R01,
  • 2004
Highly Influential
4 Excerpts

R5: Assessment Procedure for the High Temperature Response of Structures, Issue 3”, British Energy Generation Ltd, Barnwood, Gloucestershire, UK

  • R. A. Ainsworth
  • 2003
Highly Influential
4 Excerpts

Application of the Linear Matching Method to the Integrity Assessment for the High Temperature Response of Structures

  • H F.Chen, A.R.S. Ponter
  • ASME Pressure Vessels and Piping Division…
  • 2003
Highly Influential
6 Excerpts

The 3-D shakedown and limit analysis using the linear matching method

  • H F.Chen, R S.PonterA.
  • International Journal of Pressure Vessel and…
  • 2002
Highly Influential
6 Excerpts

S.,2001,“A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading

  • H FChen, A R.Ponter
  • European Journal of Mechanics A/Solids,
  • 2001
Highly Influential
7 Excerpts

Assessment of creep-fatigue endurance of large cruciform weldments

  • I Bretherton, P J Budden
  • Trans. SMiRT 15,
  • 1999
Highly Influential
3 Excerpts

Shakedown Limits for a General Yield Condition: Implementation and Examples for a Von Mises Yield Condition

  • R S.PonterA., M. Engelhardt
  • European Journal of Mechanics, A/Solids,
  • 2000
2 Excerpts

Similar Papers

Loading similar papers…