Modeling flank wear of carbide tool insert in metal cutting

  title={Modeling flank wear of carbide tool insert in metal cutting},
  author={Xichun Luo and Kai Cheng and R. Holt and Xianping Liu},

Figures and Tables from this paper

An Experimental Investigation on Effect of Cutting Fluids in Turning with Coated Carbides Tool
The major needs in machining are high material removal rate, good work surface finish and low tool wear. These objectives can be achieved by reducing tool wear using proper cooling system of the tool
The P 40 Cutting Tool Wear Modelization Machining Fk 20 MnCr 5
This work presents an experimental study to describe a wear zone in the P40 cutting tools used during a dry lathing. Mechanics of cutting has been presented to investigate the effects of edge
The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5
This work presents an experimental study to describe a wear zone in the P40 cutting tools used during a dry lathing. Mechanics of cutting has been presented to investigate the effects of edge
Flank wear prediction of ceramic tools in hard turning
Due to technical and economical factors, hard turning is competing successfully with the grinding process in the industries. Many practical applications require components to be hardened in order to
Tool Wear and Surface Roughness in Turning AISI 8620 using Coated Ceramic Tool
Surface roughness decreased when the cutting speed was increased and tool wear was not noticeable for a few tests, but increased rapidly at higher cutting speed, feed rate, higher depth of cut and increase in time.
Wear behavior of tool flank in the side milling of Ti6Al4V: An analytical model and experimental validation
  • C. Yue, Xiaochen Li, Yujing Sun
  • Materials Science
    Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
  • 2021
Due to the poor machinability of Ti6Al4V material, the cutting tool can easily suffer flank wear during the process of high-speed side milling, which reduces the tool life as well as the surface
Experimental investigation of tool wear characteristics and analytical prediction of tool life using a modified tool wear rate model while machining 90 tungsten heavy alloys
Tungsten heavy alloys are widely used in the manufacturing of weights for aircraft, missiles, boats and race cars; penetrators; radiation shielding; and radioisotope containers. Manufacturing these


A Simulated Investigation on Surface Texture/Topography Generation in Precision Turning Processes
The modelling approach integrates dynamic cutting force model, thermal model, vibration model, chatter model, tool wear model, machining system response model and surface topography model as a whole to investigate the generation of precision surfaces in relation to the affecting factors in precision manufacturing qualitatively and quantitatively.
Nonlinear Effects in Precision Machining Engineering Materials
The dynamic surface generation in precision turning processes is modelled and simulated by an integrated modelling approach. The nonlinear models, such as regenerative chatter model, tool wear model
Effects of coolant on temperature distribution in metal machining
AbstractThe effects of coolant on tool temperature in metal turning operations were studied both experimentally and theoretically. Values for the coefficient of heat transfer from the tool to the
Metal Machining: Theory and Applications
Metal machining is one of the most widespread and economically important engineering industry manufacturing processes. Although it is an old and established process, changes and improvements occur
Intelligent tool wear estimation system through artificial neural networks and fuzzy modeling
  • R. Kuo, P. Cohen
  • Computer Science, Materials Science
    Artif. Intell. Eng.
  • 1998
Hidden Markov model-based tool wear monitoring in turning
Experimental results show that successful tool state detection rates as high as 97% can be achieved by using the proposed new modeling framework for tool wear monitoring in machining processes using hidden Markov models.
The Machining of Metals
Tool Wear Detection Using Time Series Analysis of Acoustic Emission
Monitoring of cutting tool wear based on time series analysis of acoustic emission signals suggests that tool wear detection can be achieved by monitoring the evolution of the model parameter vector during machining processes.