Model Reference Adaptive Control Design for a Shunt Active Power Filter System

@article{Shyu2006ModelRA,
  title={Model Reference Adaptive Control Design for a Shunt Active Power Filter System},
  author={K. Shyu and Ming-Ji Yang and Yen-mo Chen and Yi-Fei Lin},
  journal={IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics},
  year={2006},
  pages={73-78}
}
  • K. Shyu, Ming-Ji Yang, +1 author Yi-Fei Lin
  • Published 2006
  • Engineering, Computer Science
  • IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics
In this paper, model reference adaptive control (MRAC) is proposed for a single-phase shunt active power filter (APF) to improve line power factor and to reduce line current harmonics. The proposed active power filter controller forces the supply current to be sinusoidal with low current harmonics and in phase with the line voltage. The advantages of using MRAC over conventional proportional-integral (PI) control are more flexibility, adaptive and robustness; moreover, MRAC can self-tune the… Expand
A robust adaptive strategy for improving harmonic compensation in shunt active power filters
This paper investigates the use of a robust adaptive control strategy for improving the harmonic compensation in shunt active power filters (SAPF). This control scheme is applied on the filterExpand
Control analysis of an active power filter using Lyapunov candidate
To reduce harmonic distortion in the power lines and to improve the system power quality, the applications of active power filter (APF) has attracted a lot of attentions. A Lyapunov-based currentExpand
Performance enhancement of shunt active power filter with the application of an adaptive controller
TLDR
It is observed from the result of implementation that the proposed controller-based SAPF performs superior than the existing ICC-PI in terms of robustness, adaptability, reliability and flexibility to various grid perturbations, such as harmonics, noise etc. Expand
Digital Control of a Shunt Hybrid Power Filter Adopting a Nonlinear Control Approach
TLDR
A nonlinear derivative-less control approach for controlling a three-phase shunt hybrid power filter (SHPF) and significantly high correlation between the experimental results and the theoretical model, implemented with SIMULINK/Matlab is obtained. Expand
A non-standard adaptive control for shunt active power filter without current harmonic detection
Conventional control strategies, used in shunt active power filters (SAPF), employ real-time instantaneous harmonic detection schemes which are usually implemented with digital filters. ThisExpand
A Robust Adaptive Control Strategy of Active Power Filters for Power-Factor Correction, Harmonic Compensation, and Balancing of Nonlinear Loads
This paper introduces a robust adaptive control strategy of shunt active power filters (SAPF) for power-factor correction, harmonic compensation, and balancing of nonlinear loads. The proposedExpand
Model reference adaptive fuzzy control of a shunt active power filter
  • Kaiqi Ma, J. Fei
  • Computer Science
  • 2014 9th IEEE Conference on Industrial Electronics and Applications
  • 2014
TLDR
Model reference adaptive fuzzy control method is proposed to control the active power filter (APF) and model the APF system caused by nonlinear characteristics, variable parameters and external interferences to demonstrate that MRAFC method is capable of reducing the modeling error and tracking reference current signal accurately. Expand
Model reference adaptive fuzzy control of a shunt active power filter
Model reference adaptive fuzzy control (MRAFC) is proposed to control the active power filter (APF) and model the APF system caused by nonlinear characteristics, variable parameters and externalExpand
Adaptive fuzzy backstepping control of three-phase active power filter
Abstract A backstepping controller (BC) and an adaptive fuzzy backstepping controller (AFBC) are proposed for three-phase active power filter (APF) in this paper. Firstly, the dynamic model for APFExpand
Adaptive vector control for voltage source converters
In this work, an adaptive vector controller is designed for a three-phase voltage source converter (VSC) to provide power factor compensation. The method relies on a third-order non-linear model ofExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 36 REFERENCES
A new control strategy for single-phase shunt active power filters using a Lyapunov function
TLDR
Experimental results that are obtained for steady-state operation and step changes in the load are presented to verify the correct operation of the proposed control strategy based on Lyapunov's stability theory. Expand
Unified constant-frequency integration control of active power filters-steady-state and dynamics
An active power filter (APF) is a device that is connected in parallel to and cancels the reactive and harmonic currents from a group of nonlinear loads so that the resulting total current drawn fromExpand
Linear and Nonlinear Control Techniques for a Three-Phase Three-Level NPC Boost Rectifier
TLDR
The linear PI controllers are characterized by reduced complexity but poor performance, whereas the nonlinear control technique has improved the converter performance significantly, while nonlinear MRAC exhibits much better performance in a wide operating range. Expand
Performance Improvement of Shunt Active Power Filter With Dual Parallel Topology
This paper describes the control and parallel operation of two active power filters (APFs). Possible parallel operation situations of two APFs are investigated, and then the proposed topology isExpand
Adaptive speed control of induction motor with DSP implementation
  • E. Leksono, Pratikto
  • Engineering
  • 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004
  • 2004
In this paper, a simple adaptive speed control of induction motor is described and implemented using dedicated digital signal processor (DSP). The controller-structure design is based on vectorExpand
Active filter system implementation
Adjustable speed AC drives with low input current THD are becoming increasingly important in industry. This article has detailed the implementation of a parallel active filter, which is integratedExpand
Parameter sensitivity of MRAC models employed in IFO-controlled AC motor drive
TLDR
To improve the robustness of the MRAC strategy, a cascade parameter estimation technique has been used to track the variations in r/ sub s/ and /spl sigma/l/sub s/, and the experimental results obtained with the proposed estimation technique, as well as with the MRac strategy. Expand
Single phase active power filter
Single phase active power filter (APF) with sliding mode control is analyzed mathematically and by simulation. An APF is power electronics device that is connected parallel to the grid and the load,Expand
Single-phase integrated power quality compensator based on capacitor-clamped configuration
A control scheme of an integrated power quality compensator, which employs an active rectifier to work simultaneously as an active power filter (APF) to decrease current harmonics, is proposed. TheExpand
Application of the MRAC with simplified discrete parameter adaptation algorithm for control of the DC electromotor drive
  • Z. Ban, P. Crnosija
  • Engineering
  • IEEE International Conference on Industrial Technology, 2003
  • 2003
The application of the simplified model reference adaptive control algorithm with parameter adaptation, to the DC motor drive has been considered. DC motor drive, with a basic control loops andExpand
...
1
2
3
4
...