Microstructural control and selective C2H5OH sensing properties of Zn2SnO4 nanofibers prepared by electrospinning.

@article{Choi2011MicrostructuralCA,
  title={Microstructural control and selective C2H5OH sensing properties of Zn2SnO4 nanofibers prepared by electrospinning.},
  author={Seung-Hoon Choi and In-Sung Hwang and Jong‐Heun Lee and Seong-Geun Oh and Il-Doo Kim},
  journal={Chemical communications},
  year={2011},
  volume={47 33},
  pages={
          9315-7
        }
}
Microstructural evolution of spinel Zn(2)SnO(4) nanofibers was manipulated via an in situ phase separation process of inorganic precursors and a matrix polymer during electrospinning and calcination. Chemiresistive gas sensors using porous Zn(2)SnO(4) fibers exhibited superior C(2)H(5)OH sensing response. 
SnO2@Co3O4 p–n heterostructures fabricated by electrospinning and mechanism analysis enhanced acetone sensing
SnO2@Co3O4 p–n heterostructure nanotubes have been obtained for the first time via precursor nanofibres and subsequent annealing. The structure and properties of heterostructure nanotubes were
Thin-walled NiO tubes functionalized with catalytic Pt for highly selective C2H5OH sensors using electrospun fibers as a sacrificial template.
TLDR
Sandwich Pt-NiO-Pt tube networks exhibited superior C( 2)H(5)OH sensing response and remarkable selectivity against CO and H(2) gases.
Enhanced room temperature ammonia sensing properties of polypyrrole–zinc tin oxide nanocomposite
Polypyrrole (PPy)–Zn2SnO4 nanocomposites with different weight percentages (0–20%) of Zn2SnO4 were successfully prepared by chemical oxidative polymerization. The prepared nanocomposites were depos...
Porous MoO3/SnO2 Nanoflakes with n–n Junctions for Sensing H2S
Currently, the detection of hydrogen sulfide is important due to its negative effect on environment and human health. In this paper, the porous MoO3/SnO2 nanoflakes (NFs) with n–n junctions, compos...
Enhanced sensing properties of SnO2 nanofibers with a novel structure by carbonization
Mesoporous WO3 Nanofibers with Protein-Templated Nanoscale Catalysts for Detection of Trace Biomarkers in Exhaled Breath.
TLDR
This work proposes a rational design and facile synthesis concept for achieving exceptionally sensitive and selective detection of trace target biomarkers in exhaled human breath using a protein nanocage templating route for sensitizing electrospun nanofibers (NFs).
Exhaled VOCs sensing properties of WO3 nanofibers functionalized by Pt and IrO2 nanoparticles for diagnosis of diabetes and halitosis
This work presents a simple synthetic route to produce WO3 nanofibers functionalized by catalytic Pt and IrO2 nanoparticles and their superior acetone and H2S sensing characteristics, demonstrating
Phase and microstructural evolution of Sn particles embedded in amorphous carbon nanofibers and their anode properties in Li-ion batteries
Phase and microstructural evolution of Sn-Carbon composite nanofibers (NFs) under various heat treatment conditions was clearly demonstrated in this work. Amorphous carbon nanofibers (a-CNFs) that
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 29 REFERENCES
Nanocomposite ZnO–SnO2 Nanofibers Synthesized by Electrospinning Method
TLDR
It is shown that the crystalline nanocomposite nanofibers with stoichiometry of (1 − x)ZnO-(x)SnO2 (x ≤ 0.45) stabilize after the calcination and possess some morphological and optical properties that strongly depend on Sn content.
An efficient bicomponent TiO2/SnO2 nanofiber photocatalyst fabricated by electrospinning with a side-by-side dual spinneret method.
TLDR
It is demonstrated that the electrospinning process with a side-by-side dual spinneret can be a simple approach for fabricating bicomponent TiO2/SnO2 nanofibers with controllable heterojunctions and it is believed that this versatile approach can be extended to fabricate other novel high-efficiency bIComponent photocatalysts.
Preparation of Porous Tin Oxide Nanobelts Using the Electrospinning Technique
The electrospinning method is adopted to prepare utralong PEO/stannic hydroxide composite nanofibers. Tin-oxide nanobelts can be obtained by calcination of the composite nanofibers in an open
Nanobelts and nanocones of spinel Zn2SnO4
One-dimensional nanostructures of ternary oxide spinel, Zn2SnO4 have been prepared for the first time on a large scale via a reaction between element Sn, ZnS and Fe(NO)(3) at 1350 degrees C in a
V2O5 nanorods on TiO2 nanofibers: a new class of hierarchical nanostructures enabled by electrospinning and calcination.
TLDR
It is demonstrated that electrospinning can be combined with calcination to further maneuver the morphology and phase structure of nanofibers and can be extended to fabricate other more complex architectures.
Single crystalline zinc stannate nanoparticles for efficient photo-electrochemical devices.
TLDR
Single crystalline zinc stannate nanoparticles were synthesized by a simple one-step hydrothermal reaction with a high production yield and exhibits an efficient performance for applications in dye-sensitized solar cells.
...
1
2
3
...