Microstrip inductor design and implementation

@inproceedings{Eroglu2010MicrostripID,
  title={Microstrip inductor design and implementation},
  author={Abdullah Eroglu},
  year={2010}
}
Design, simulation, and implementation of microstrip spiral inductors for RF applications at the high frequency (HF) range are given. The simplified lumped element equivalent model parameters for spiral inductor are used to obtain the initial physical dimensions for the design. The spiral inductor is then simulated with planar electromagnetic simulator, Sonnet, using the geometry constructed with the physical dimensions obtained for the desired inductance value. The parametric study of the… CONTINUE READING

References

Publications referenced by this paper.
SHOWING 1-6 OF 6 REFERENCES

A study on substrate effects of silicon-based RF passive components

C. P. Yue, S.S.Wong
  • 1999 IEEE MTT-S Int. Microwave Symp. Dig., pp. 1625–1628, June 1999. 26th Annual Review of Progress in Applied Computational Electromagnetics April 26 - 29, 2010 - Tampere, Finland ©2010 ACES 861
  • 1999
VIEW 1 EXCERPT

Modeling of spiral inductors on lossy substrates for RFIC applications

  • 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192)
  • 1998
VIEW 1 EXCERPT

A physical model for planar spiral inductors on silicon

  • International Electron Devices Meeting. Technical Digest
  • 1996
VIEW 1 EXCERPT

Silicon MMIC inductor modeling for high volume, lowcost applications

D. Lovelace, N. Camilleri, G. Kannell
  • Microw. J., pp. 60–71, Aug. 1994.
  • 1994
VIEW 1 EXCERPT

An analytical model of planar inductors on lowly doped silicon substrates for high frequency analog design up to 3 GHz , ” in

N. Camilleri D. Lovelace, G. Kannell
  • 1996 Symp . VLSI Circuits Dig . Tech . Papers