Mechanical property study on C90300 copper composites reinforced with rare earth oxide

  title={Mechanical property study on C90300 copper composites reinforced with rare earth oxide},
  author={P. Mayilsamy and S. P. Kumareshbabu and K. Nayan and S. Srinivasan},
  journal={Materials Today: Proceedings},
Abstract The copper alloys with conventional grain structure and size are soft materials with relatively low yield strength. The strength of copper based CMCs increases with the reinforcement addition. In the present experiment we have gone with Tin bronze as the matrix, an alloy of copper since it has got superior properties compared to copper due to the incorporation of Tin. The experiment revolves around the development of composite of Tin bronze with Rare Earth Oxide addition. Addition of… Expand
2 Citations
Sliding Wear Behavior of Cu + Sn + Cr Composites by Taguchi Technique
In tribological industries, metal matrix composites are now being more commonly used because of their inherent properties such as high stiffness, high strength, high toughness. The effect onExpand
Multilevel Factor Design of Bronze-Based Composites Experimental Study Under Sliding Wear Conditions
  • Sreenivasa R, S. Mallur
  • Journal of Bio- and Tribo-Corrosion
  • 2021
The tribological properties of cobalt-supplemented bronze-based composites were investigated. Using the stir casting technique, cobalt metal powders with a particle size of 40 microns were reinforcedExpand


Microstructure, mechanical properties and machinability of Cu–Zn–Mg and Cu–Zn–Sb brass alloys
ABSTRACT Lead-free alloys have attracted great attentions recently due to the toxic nature of lead for the human body. In this study, low amounts of Mg and Sb were added to the Cu65–Zn35 brass andExpand
Corrosion behavior of copper-based metal-matrix composites
A research program was conducted to assess the corrosion behavior of copper-based metal-matrix composites. Two categories of composites were studied: commercially available composites andExpand
Copper and Copper Alloys
Copper was among the first metals to be put into utilitarian service. The Unified Numbering System (UNS) is the accepted alloy designation system in North America for wrought and cast coppers andExpand
An attempt to synthesize Sn-Zn-Cu alloy nanoparticles
Abstract Investigations on the synthesis of bi- or tri-metallic alloy nanoparticles have been relatively limited. Thus, we present here results of experiments to synthesize Sn-30Zn-10Cu (wt%)Expand
Structure and properties of cerium oxides in bulk and nanoparticulate forms
Abstract The experimental and computational studies on the cerium oxide nanoparticles, as well as stoichiometric phases of bulk ceria are reviewed. Based on structural similarities of these phases inExpand