Mechanical and three-body abrasive wear behaviour of three-dimensional glass fabric reinforced vinyl ester composite

@article{Suresha2008MechanicalAT,
  title={Mechanical and three-body abrasive wear behaviour of three-dimensional glass fabric reinforced vinyl ester composite},
  author={B. Suresha and G. Chandramohan and Siddaramaiah and K. Shivakumar and M. Ismail},
  journal={Materials Science and Engineering A-structural Materials Properties Microstructure and Processing},
  year={2008},
  volume={480},
  pages={573-579}
}
  • B. Suresha, G. Chandramohan, +2 authors M. Ismail
  • Published 2008
  • Materials Science
  • Materials Science and Engineering A-structural Materials Properties Microstructure and Processing
Abstract The mechanical and three-body abrasive wear behaviour of two- and three-dimensional E-glass woven fabric reinforced vinyl ester composites were studied in this article. The mechanical properties were evaluated using universal testing machine as per ASTM D-638. Three-body abrasive wear tests were conducted using rubber wheel abrasion tester (RWAT) under different abrading distances at two loads, wherein the wear volume loss were found to increase and that of specific wear rate decrease… Expand
Investigations on Three-Body Abrasive Wear Behaviour of Composite Brake Pad Material
Enhancement of abrasion resistance of phenol formaldehyde based composite brake pad material with various constituents viz. abrasive, filler and binder have been synergistically investigated in theExpand
DEVELOPMENT AND STUDY OF ABRASIVE WEARS AND MECHANICAL BEHAVIOUR OF PARTICULATE FILLED POLYMERIC COMPOSITES
The aim of this experimental study is to study the three body abrasive wear, dry sliding abrasive wear and mechanical behaviour of neat Vinyl Ester and Al203, TiO2 and MoS2 filler of 4% and 8% filledExpand
Study on friction and sliding wear behavior of woven S-glass fiber reinforced vinylester composites manufactured with different comonomers
The effect of variations in sliding velocity and applied normal load on the friction and sliding wear behavior of glass–vinylester composite (G–V) is studied by measuring the weight change andExpand
Evaluation of mechanical and wear performance of glass/carbon fiber reinforced polymer hybrid composite
Abstract Fiber reinforced polymer composites are used in various applications due to their improved mechanical properties and lighter weight. However, these materials have inadequate wear resistanceExpand
Mechanical and abrasive wear behavior of carbon fabric reinforced epoxy composite with and without fly ash cenospheres
Carbon fabric reinforced epoxy and carbon fabric reinforced epoxy containing different weight fraction of silane-treated fly ash cenospheres filled composites were cast, sectioned, and subjected toExpand
Physical, mechanical and abrasive wear behaviour of jute fiber reinforced polymer composites
Now-a-days, abrasive wear of engineering and agricultural machine components caused by the abrasive particles is a major industrial problem. Therefore, a full understanding of the effects of allExpand
Three Body Abrasive Wear Behaviour of Polyamide 66/ Polypropylene (PA66/PP) Thermoplastic Blends
Three body abrasive wear behaviour of Polyamide 66 and Polypropylene (PA66/PP) blends in different weight percentages of 95/5, 90/10, 85/15, 80/20, 75/25 and 70/30 are investigated. The experimentsExpand
Study on the effects of nano-aluminum-oxide particulates on mechanical and tribological characteristics of chopped carbon fiber reinforced epoxy composites
An experimental study has been carried out to investigate the mechanical and tribological characteristics of chopped carbon fiber (CCF) reinforced epoxy composites filled with nano-Al2O3Expand
Abrasive Wear Performance of Aluminium Modified Epoxy-Glass Fiber Composites
For a long time, Aluminum filled epoxies molds have been used in rapid tooling process. These molds are very economical when applied in manufacturing of low volume of plastic parts. To improve theExpand
Abrasive wear behaviors of high-vanadium alloy steel using the dry sand/rubber wheel apparatus
The wear property of high-vanadium alloy steel was studied using a dry sand/rubber wheel testing apparatus and the microstructures and failure behaviors were analyzed by scanning electron microscopy,Expand
...
1
2
3
...

References

SHOWING 1-10 OF 15 REFERENCES
Three-body abrasive wear behaviour of carbon and glass fiber reinforced epoxy composites
Abstract Three-body abrasive wear behaviour of carbon–epoxy (C–E) and glass–epoxy (G–E) composites has been investigated. The effect of abrading distance, viz., 270, 540, 810 and 1080 m and differentExpand
Wear mechanisms in polymer matrix composites abraded by bulk solids
Abstract An experimental study of the wear of polymer matrix composite materials subjected to abrasion from bulk materials has been conducted. Three examples of vinyl ester resin systems wereExpand
Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under lubricated sliding conditions
The friction and wear characteristics of three-dimensional (3D) braided carbon fiber-epoxy (C3D/EP) composites under lubricated sliding conditions against a quenched medium-carbon steel counterfaceExpand
Friction and Wear Characteristics of Carbon-epoxy and Glass-epoxy Woven Roving Fiber Composites
Polymer materials when reinforced with high modulus fibers yield higher strength, higher stiffness, better toughness, and good dimensional stability. Fiber reinforcements are effective in reducingExpand
Resistance to particle abrasion of selected plastics
Abstract Accelerated abrasive wear of plastic parts in a piece of production machinery prompted a laboratory study to find a material with better abrasion resistance. The abrasion occurred in aExpand
Three‐dimensionally braided carbon fiber–epoxy composites, a new type of material for osteosynthesis devices. I. Mechanical properties and moisture absorption behavior
In recent years, three-dimensionally (3D) braided composites have attracted a great deal of attention because of their high-impact damage tolerance and fatigue life, superior fracture toughness, andExpand
Tribo performance of polyaryletherketone composites
The mechanical and tribological properties of various injection-moulded polyaryletherketones (PAEKs) and their composites are presented in this paper. The mechanical properties studied were tensileExpand
The abrasive wear of short fibre composites
Abstract The wear rate and the friction coefficient of short fibre composites (carbon fibre- or glass fibre-reinforced plastics) made by injection moulding are measured and the microstructures areExpand
Effect of testing conditions and microstructure on the sliding wear of graphite fibre/PEEK matrix composites
The sliding friction and wear behaviour of unreinforced polyetheretherketone (PEEK) matrix and its unidirectional continuous and two-dimensional woven graphite fibre-reinforced composites wereExpand
An investigation of the wear of polymeric materials
Abstract A study has been made of the wear of the polymers, polytetrafluoroethylene, polypropylene, polyoxymethylene, high density polyethylene, poly(vinyl chloride), polyamide and poly(methylExpand
...
1
2
...