Mechanical Properties of Kevlar-49 Fibre Reinforced Thermoplastic Composites

@article{Yeung2012MechanicalPO,
  title={Mechanical Properties of Kevlar-49 Fibre Reinforced Thermoplastic Composites},
  author={K. Yeung and Kamineni Pitcheswara Rao},
  journal={Polymers and Polymer Composites},
  year={2012},
  volume={20},
  pages={411 - 424}
}
Conventional materials made of glass and carbon fibres in thermoset resins are very frequently employed. Recently, thermoplastic matrix composites are being developed to improve the toughness and damage tolerance of composite laminates. The ductility of thermoplastic resins implies a more pronounced plasticity in service. Kevlar fibre has a tensile strength comparable with that of carbon fibre, a modulus between those of glass and carbon fibres and a lower density than both. Kevlar-49… Expand
Mechanical Properties of Boron and Kevlar-49 Reinforced Thermosetting Composites
Glass reinforced thermosetting composite materials are now widely usUUed in building and construction applications. However, the adoption of Boron and Kevlar based composite materials in thisExpand
Investigation of Thermal and Mechanical Properties of Aramid Fiber Reinforced Thermoplastic Polyurethane Elastomer Composites
Along with the emergence of thermoplastic polyurethane materials with its elastomeric behavior, there has been an improvement in the production of composites with functional properties by addingExpand
Evaluation of Tensile Strength of Carbon-Kevlar Fiber Reinforced Epoxy Hybrid Composites by Experimentation
The varied high strength fibers are now being explored for high performance application in automotive and aerospace sectors in larger scale. Carbon and Kevlar fibers are classified as a high strengthExpand
Static analysis of thermoset-thermoplastic-based hybrid composite
A growing response in the development of hybrid composites to conquer the deficiency of neat composites has provoked doing this work. Thermoplastic Polycarbonate material offers better impactExpand
Kevlar Reinforced Polymer Matrix Composite for Structural Application
In any structural systems, the material properties play a major role in their behavior when subjected to different loadings. The present work focuses on the development of novel hybrid polymer basedExpand
Reinforcing Effects of Natural Micro-Particles on the Dynamic Impact Behaviour of Hybrid Bio-Composites Made of Short Kevlar Fibers Reinforced Thermoplastic Composite Armor
Hybrid bio-composites are developed for use in protective armor through positive hybridization offered by reinforcement of high-density polyethylene (HDPE) with Kevlar short fibers and palm woodExpand
Synthesis, characterization and machinability studies on thin hybrid composites with SiC nano particles
In this work, novel combinations of composite materials were developed, with Kevlar 49 and S-Glass fibers as primary reinforcement and SiC Nano particles as secondary reinforcement with variousExpand
The Effects of Micro- and Nano-Fillers’ Additions on the Dynamic Impact Response of Hybrid Composite Armors Made of HDPE Reinforced with Kevlar Short Fibers
ABSTRACT Hybrid composite armors consisting of Kevlar short fibers reinforced high-density polyethylene were prepared and the effects of the addition of micro and nano-fillers on the dynamic impactExpand
Aramid fibre as potential reinforcement for polymer matrix composites: a review
For the manufacturing of composites, researchers all over the world have moved from commercially available glass fibres to aramid fibres in recent years. The low density, ease of availability andExpand
Manufacture and Material Characterisation of Aramid Fibre Reinforced Thermoplastic Composites
This project will examine the manufacture and material characterisation of an aramid fibre reinforced thermoplastic using high density polyethylene reinforced with Kevlar. It will also include aExpand
...
1
2
3
4
...

References

SHOWING 1-10 OF 29 REFERENCES
In-plane shear testing of medium and high modulus woven graphite fiber reinforced/polyimide composites
Abstract Iosipescu shear tests were performed at room temperature and at 316 °C (600 °F) on woven composites with either M40J or M60J graphite fibers and PMR-II-50 polyimide resin matrix. TheExpand
Recycling Carbon-Fiber-Reinforced Thermoplastic Composites
Advanced composite materials are being used more and more in structural applications, which raises the question of the disposal of this kind of material. In this paper two different possibilities forExpand
Interface and Interphase in Carbon Fibre-Styrene Butadiene Rubber (SBR) Composites
Abstract The stress transfer capacity of carbon fibre-SBR interfaces is analysed in terms of interfacial shear strength and measured by means of a fragmentation test on single fibre composites. ForExpand
Kevlar fiber–epoxy adhesion and its effect on composite mechanical and fracture properties by plasma and chemical treatment
Kevlar 49 fibers were surface-modified by NH3-, O2-, and H2O-plasma etching and chlo-rosulfonation and subsequent reaction with some reagents (glycine, deionized water, eth-ylendeiamine, andExpand
Impact Resistance of Cross-Plied Polyphenylene Sulfide Composites
Impact resistance and residual strength of thermoplastic polyphenylene sulfide (PPS) composites are studied with regard to laminate configurations consisting of cross-plied Glass/PPS, 50% hybridExpand
The Effect of chemical treatment on reinforcement/matrix interaction in Kevlar-fiber/bismaleimide composites
Abstract The thermal properties of all the bismaleimides have been examined by differential scanning calorimetry, thermogravimetry and thermomechanical analysis. BothExpand
Stiffness Predictions for Unidirectional Short-Fiber Composites: Review and Evaluation
TLDR
Micromechanics models for the stiffness of aligned short-fiber composites are reviewed and evaluated, and the best predictions come from the Mori–Tanaka model and the bound interpolation model of Lielens et al. Expand
Mechanics of composite materials - A unified micromechanical approach
1. Fundamentals of the Mechanics of Composites. Representative volume element. Volumetric averaging. Homogeneous boundary conditions. Average strain theorem. Average stress theorem. Effective elasticExpand
Effect of acidic anode treatment on carbon fibers for increasing fiber-matrix adhesion and its relationship to interlaminar shear strength of composites
An anodic surface treatment of PAN-based carbon fibers has been studied in increasing the surface functional groups on fibers, resulting in increasing composite mechanical behavior. With a viewpointExpand
The processing, properties, and structure of carbon fibers
This paper reviews the processing, properties, and structure of carbon fibers. Carbon fibers are derived from several precursors, with polyacrylonitrile being the predominant precursor used today.Expand
...
1
2
3
...