Measurement and Modeling of Rotational Core Losses of Soft Magnetic Materials Used in Electrical Machines: A Review

@article{Guo2008MeasurementAM,
  title={Measurement and Modeling of Rotational Core Losses of Soft Magnetic Materials Used in Electrical Machines: A Review},
  author={Youguang Guo and Jianguo G. Zhu and Jinjiang Zhong and Haiyan Lu and Jianxun Jin},
  journal={IEEE Transactions on Magnetics},
  year={2008},
  volume={44},
  pages={279-291}
}
In many situations, for example, in the cores of a rotating electrical machine and the T-joints of multiphase transformers, the magnetic flux varies with time in terms of both magnitude and direction, i.e., the local flux density vector rotates with varying magnitude and varying speed. Therefore, it is important that the magnetic properties of the core materials under various rotational magnetizations be properly investigated, modeled, and applied in the design and analysis of electromagnetic… CONTINUE READING
Highly Cited
This paper has 89 citations. REVIEW CITATIONS

Citations

Publications citing this paper.
Showing 1-10 of 34 extracted citations

90 Citations

01020'10'13'16'19
Citations per Year
Semantic Scholar estimates that this publication has 90 citations based on the available data.

See our FAQ for additional information.

References

Publications referenced by this paper.
Showing 1-10 of 55 references

Alternating and rotational power loss at 50c/s in 3% silicon-iron sheets

C. R. Boon, J. E. Thompson
Proc. Inst. Elect. Eng., vol. 112, no. 11, pp. 2147–2151, Nov. 1965. • 1965
View 5 Excerpts
Highly Influenced

Numerical modeling of magnetic materials for computer aided design of electromagnetic devices

J. G. Zhu
Ph.D. thesis, Univ. Technology, Sydney, Australia, Jul. 1994. • 1994
View 6 Excerpts
Highly Influenced

The measurement of rotational power loss in electrical sheet steel using a vertical yoke system

J. Sievert, H. Ahlers, +3 authors J. Xu
J. Magn. Magn. Mater., vol. 112, no. 1-3, pp. 91–94, Jul. 1, 1992. • 1992
View 4 Excerpts
Highly Influenced

Rotational hysteresis loss in electrical sheet steels

F. Brailsford
J. Inst. Elect. Eng., vol. 83, pp. 566–575, 1938. • 1938
View 4 Excerpts
Highly Influenced

Studies on the measurement of two dimensional magnetic phenomena in electrical sheet steel at PTB

J. Sievert
Proc. 1st Int. Workshop Magnetic Properties Electr. Sheet Steel Under 2-D Excitation, Physikalisch-Technische Bundesanstalt (PTB), Braunschweig, Germany, Sep. 1991, pp. 102–116. • 1991
View 7 Excerpts
Highly Influenced

Studies on two-dimensional magnetic measurement and properties of electrical steel sheets at oita university

M. Enokizono
Proc. 1st Int. Workshop Magnetic Properties Electr. Sheet Steel Under 2-D Excitation, Physikalisch-Technische Bundesanstalt (PTB), Braunschweig, Germany, Sep. 1991, pp. 82–101. • 1991
View 5 Excerpts
Highly Influenced

Method for the measurement of rotational power loss and related properties in electrical steel sheets

W. Brix, K. A. Hempel, W. Schroeder
IEEE Trans. Magn., vol. MAG-18, no. 6, pp. 1469–1471, Nov. 1982. • 1982
View 4 Excerpts
Highly Influenced

Influence of stress on rotational loss in silicon iron

A. Basak, A. J. Moses
Proc. Inst. Elect. Eng., vol. 125, no. 2, pp. 165–168, Feb. 1978. • 1978
View 4 Excerpts
Highly Influenced

Measurement of rotating flux in silicon iron laminations

A. J. Moses, B. Thomas
IEEE Trans. Magn., vol. MAG-9, no. 4, pp. 651–654, Dec. 1973. • 1973
View 4 Excerpts
Highly Influenced

3D vector magnetic properties of soft magnetic composite material

Y. G. Guo, J. G. Zhu, Z. W. Lin, J. J. Zhong
J. Magn. Magn. Mater., vol. 302, no. 2, pp. 511–516, Jul. 2006. • 2006
View 2 Excerpts

Similar Papers

Loading similar papers…