• Corpus ID: 247447028

Materials for Future Calorimeters

  title={Materials for Future Calorimeters},
  author={Minfang Yeh and R Y Zhu},
Future HEP experiments present stringent challenges to calorimeter materials in radiation tolerance, time response and project cost. The 2019 report of the DOE Basic Research Needs Study on High Energy Physics Detector Research and Development points out three priority research directions for future calorimetry. Following these research directions letters of interest were submitted to the Snowmass organized by the Division of Particles and Fields of the American Physics Society. This report… 

Figures and Tables from this paper



Dual-Readout Calorimetry for Future Experiments Probing Fundamental Physics

In this White Paper for the 2021 Snowmass process, we detail the status and prospects for dual-readout calorimetry. While all calorimeters allow estimation of energy depositions in their active

Development of Novel Inorganic Scintillators for Future High Energy Physics Experiments

Total absorption electromagnetic calorimeters (ECAL) made of inorganic crystals provide the best energy resolution and detection efficiency for photon and electron measurements, so are the choice for

Space-Time Development of Electromagnetic and Hadronic Showers and Perspectives for Novel Calorimetric Techniques

The performance of hadronic calorimeters will be a key parameter at the next generation of High Energy Physics accelerators. A detector combining fine granularity with excellent timing information

Use of Particle Flow Algorithms in a Dual Readout Crystal Calorimeter

The ability to grow clear, dense scintillating crystals presents an opportunity for development of a total absorption calorimeter that could contain multi-GeV hadrons in a detector volume similar to

Extruded scintillator for the calorimetry applications

An extrusion line has been installed and successfully operated at FNAL (Fermi National Accelerator Laboratory) in collaboration with NICADD (Northern Illinois Center for Accelerator and Detector

Design, performance, and calibration of CMS hadron-barrel calorimeter wedges

Extensive measurements have been made with pions, electrons and muons on four production wedges of the compact muon solenoid (CMS) hadron barrel (HB) calorimeter in the H2 beam line at CERN with

MeV-scale performance of water-based and pure liquid scintillator detectors

This paper presents studies of the performance of water-based liquid scintillator in both 1-kt and 50-kt detectors. Performance is evaluated in comparison to both pure water Cherenkov detectors and a

Simulation Studies of a Total Absorption Dual Readout Calorimeter

We have created a flexible, easy to use simulation framework based on GEANT 4 to perform detailed simulations of a crystal based total absorption calorimeter with dual readout. The correction to the

A scintillating tile/fiber system for the CDF plug upgrade EM calorimeter

Metal-loaded organic scintillators for neutrino physics

Organic liquid scintillators are used in many neutrino physics experiments of the past and present. In particular for low energy neutrinos when realtime and energy information are required, liquid