Material Properties at Low Temperature

@article{Duthil2015MaterialPA,
  title={Material Properties at Low Temperature},
  author={Patxi Duthil},
  journal={arXiv: Accelerator Physics},
  year={2015},
  pages={77-95}
}
  • P. Duthil
  • Published 28 January 2015
  • Physics
  • arXiv: Accelerator Physics
From ambient down to cryogenic temperatures, the behaviour of materials changes greatly. Mechanisms leading to variations in electrical, thermal, mechanical, and magnetic properties in pure metals, alloys, and insulators are briefly introduced from a general engineering standpoint. Data sets are provided for materials commonly used in cryogenic systems for design purposes. 
Low-temperature thermoelectric transport properties of selected metals and dielectrics
Abstract Reliable and accurate estimate of experimentally measured thermal conductivity values are presented in this work for specific materials, which carries significant importance from low
THERMOPHYSICAL PROPERTIES OF 904L AUSTENITIC STEEL
This paper presents the results of the structural investigations and thermophysical properties of 904L steel parent material. Experimental studies on the structure of 904L steel proved a pure
Direct Measurement of Thermoelectric Currents During Cool Down
In recent years there has been much discussion on thermoelectric effects and their role in flux expulsion during cool down of SRF cavities. Magnetic field is often measured to asses both flux
Quantitative correlation between the void morphology of niobium-tin wires and their irreversible critical current degradation upon mechanical loading
TLDR
This work demonstrates a quantitative correlation between the void morphology and the electro-mechanical limits measured on different Bronze route Nb3Sn wires, and quantitatively correlated with the experimentally determined limits of the irreversible critical current degradation upon mechanical loading.
Subsurface deformation micromechanisms induced during machining of titanium alloys at low temperatures, and a novel testing methodology to examine their machining behaviour
The aerospace industry’s drive towards higher productivity has led manufacturers to strive for higher surface speeds in metal cutting. Machining of titanium alloys leads to high temperatures
Effect of cryogenic temperature and frequency on copper coils
There is increasing interest in development of magnetic energy storage with conduction cooling. In contrast with the liquid- and gas-cooled coils, the conduction-cooled coils are expected to have
Improved Copper–Epoxy Adhesion by Laser Micro- and Nano-Structuring of Copper Surface for Thermal Applications
TLDR
Using adequate laser parameters, it is possible to obtain high bonding strength values limited by cohesive epoxy fracture, together with good thermal conductivity at ambient and cryogenic temperatures.
Mechanical Design of Superconducting Accelerator Magnets
This paper is about the mechanical design of superconducting accelerator magnets. First, we give a brief review of the basic concepts and terms. In the following sections, we describe the
Characterization and Analysis of On-Chip Microwave Passive Components at Cryogenic Temperatures
This paper presents the characterization and modeling of microwave passive components in TSMC 40-nm bulk CMOS, including metal-oxide-metal (MoM) capacitors, transformers, and resonators, at deep
The CryoLib - Modelling Superconductors with Modelica
  • Alexander Pollok, D. Zimmer
  • Computer Science
    Proceedings of the 2nd Japanese Modelica Conference Tokyo, Japan, May 17-18, 2018
  • 2019
TLDR
The results show that many effects occuring in cryogenic and superconducting systems can successfully be simulated using this library, and easy usability and extendability of the components is emphasized.
...
1
2
3
4
5
...

References

SHOWING 1-6 OF 6 REFERENCES
A Reference Guide for Cryogenic Properties of Materials
A thorough knowledge of the behavior of materials at cryogenic temperatures is critical for the design of successful cryogenic systems. Over the past 50 years, a tremendous amount of material
Introduction to solid state physics
Mathematical Introduction Acoustic Phonons Plasmons, Optical Phonons, and Polarization Waves Magnons Fermion Fields and the Hartree-Fock Approximation Many-body Techniques and the Electron Gas
Experimental techniques for low-temperature measurements
Acta Metall
  • 20
  • 1972