Corpus ID: 8858495

Mapping the droplet drying phenomena within a fluidized bed coater as a prediction tool for coating qualities

@inproceedings{Laksmana2008MappingTD,
  title={Mapping the droplet drying phenomena within a fluidized bed coater as a prediction tool for coating qualities},
  author={Fesia Lestari Laksmana and Paul J. A. Hartman Kok and Herman Vromans and Henderik W. Frijlink and Kees van der Voort Maarschalk},
  year={2008}
}
For a high coating quality, agglomeration and exces siv evaporation of the coating droplets during fluidized bed coating process should be avoi ded (1-3). This means that the coating process can often only be performed within a narrow operating w indow. Consequently, the selection of the process conditions and the process control are delicate ste ps to assure a good coating quality. In spite of being an established technology, the pr ocess development of a fluidized bed coating process has… Expand
1 Citations

Figures from this paper

Functional encapsulation of small particles : quantification and control of the morphology of the coating layers : quantification and control of the morphology of the coating layers
In this chapter, an overview of the important aspects of the formulation and the process development of a functional encapsulated product is given. It is shown that there is a need of quantificationExpand

References

SHOWING 1-8 OF 8 REFERENCES
Droplet Behaviors on Substrates in Thin-Film Formation Using Ink-Jet Printing
Physical phenomena associated with the dynamic spreading and dried shape of droplets on solid surfaces were demonstrated reviewing several models and discussed with regard to designing the mostExpand
Effect of the spray-drying process on the properties of coated films in fluidized bed granular coaters
Influences of spray drying a coating liquid on the properties of coated films were investigated by using three types of fluidized bed coaters. The top spray method with a conventional fluidized bedExpand
Film formation from polymer solution using inkjet printing method
The factors determining the thin-film shape from an evaporating polymer solution droplet are experimentally studied. The polystyrene/xylene droplets, whose diameter is controlled in the range ofExpand
Pore size distribution in tablets measured with a morphological sieve.
TLDR
An alternative method for the characterization of pore structure based on image analysis of SEM micrographs is proposed, which displays a comparable relative shift of the pore size distributions to larger sizes for tablets with increasing particle size. Expand
Granule impact strength, agglomeration tendency and coating layer morphology, Powder Technology
  • 176:156-167
  • 2007
Wetting kinetics of a thin film evaporating in air, Physics of Fluids
  • 2007
influence of operating conditions on growth rate and mechanism, Advanced Powder Technology
  • 10:255-277
  • 1999
Evaporation from drops, Chemical Engineering and Processing
  • 1952