Management, conversion, and utilization of waste plastic as a source of sustainable energy to run automotive: a review

@article{Bukkarapu2018ManagementCA,
  title={Management, conversion, and utilization of waste plastic as a source of sustainable energy to run automotive: a review},
  author={Kiran Raj Bukkarapu and Dereddy Gangadhar and Y. Jyothi and Prasad Kanasani Prasad Kanasani},
  journal={Energy Sources, Part A: Recovery, Utilization, and Environmental Effects},
  year={2018},
  volume={40},
  pages={1681 - 1692}
}
ABSTRACT Increased usage of plastic and absence of an efficient system to address its non-degradability has become a serious issue threatening the human life. On the other hand, increased fossil fuel consumption which led to their depletion necessitates the search for an alternative that could replace the conventional fuels and alongside abate the emissions. Both the non-degradability of plastic and need for an alternative fuel can be addressed by converting the waste plastic to useful energy… Expand
The best suitable alternative to diesel in a compression ignition engine between waste plastic oil and waste tire oil blends with diesel
ABSTRACT Depletion of conventional fossil fuels due to their increased consumption and the stringent emission norms, urge us to search alternative fuels for automotive engines. Alongside, seriousExpand
Waste Management and Conversion to Pure Hydrogen by Application of Membrane Reactor Technology
Waste conversion has an essential role in the development of environmental-friendly methods to obtain efficient and clean energy. Due to increasing rate of waste production, waste management policyExpand
Plastic waste conversion to fuel: a review on pyrolysis process and influence of operating parameters
As the conventional fuels, like petrol, diesel, natural gas, etc., are being depleted at a faster rate, it is necessary to find alternative sources of fuels. Renewable energy sources can be conside...
Thermal balancing and exergetic performance evaluation of a compression ignition engine fuelled with waste plastic pyrolytic oil and different fuel additives
Abstract This study aims at evaluating the heat energy and exergy values of waste plastic oil (WPO) blended diesel mixed with different fractions of fuel additives (ethanol as oxygenated fuelExpand
Comparison of combustion, performance, energy and exergy characteristics of a diesel engine run on plastic and tire pyrolysis oil blends with diesel
Blends of plastic oil with diesel and tire oil with diesel are applicable in powering a single-cylinder diesel engine, individually. Comparison of the individual blends of plastic oil and tire oil ...
Investigation of performance and emission characteristics of single-cylinder DI diesel engine with plastic pyrolysis oil and diethyl ether blends
Plastics usage are increasing day by day and we are yet to get a credible replacement for the same material. The disposal of after use plastic poses a major challenge and best disposal is convertin...
The influence of injection timings on performance, emission, and combustion characteristics of compression ignition engine fueled with milk scum oil biodiesel
The present study involves the investigation of the suitability of methyl esters of milk scum oil (MESO) as a substitute fuel for a compression ignition (CI) engine. The MESO was synthesized by tra...
A composition based approach to predict density, viscosity and surface tension of biodiesel fuels
Abstract The variations in biodiesel composition based on the feedstock used for its production result in significant variations in the fuel properties and thereby, engine characteristics. ThisExpand
A study on improving tire pyrolysis oil quality by blending it with biodiesels derived from edible oils
Owing to the poor physio-chemical properties of tire pyrolysis oil, its application in diesel engines is limited. It is highly viscous, denser than diesel and has lesser calorific value. Its qualit...
Formation of highly graphitic char derived from phenolic resin carbonization by Ni-Zn-B alloy
TLDR
Order graphite content could be used as a key evaluation parameter to directly reflect the quality of GPFCs based on detailed characteristics analysis and the model between three reaction conditions was built with artificial neural network (ANN). Expand
...
1
2
...

References

SHOWING 1-10 OF 46 REFERENCES
Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective
The present rate of economic growth is unsustainable without saving of fossil energy like crude oil, natural gas or coal. Thus mankind has to rely on the alternate/renewable energy sources likeExpand
Waste plastic Pyrolysis oil Alternative Fuel for CI Engine - A Review
Environmental concern and availability of petroleum fuels have caused interests in the search for alternate fuels for internal combustion engines. Conversion of waste to energy is one of the recentExpand
Tertiary recycling of waste plastic using catalytic cracking into crude oil
ABSTRACT Disposal of waste plastic and excessive use of fossil fuels have caused environmental problems in the world. According to an estimate, more than 100 million tonnes plastics are producedExpand
Performance and Emission Test of Several Blends of Waste Plastic Oil with Diesel and Ethanol on Four Stroke Twin Cylinder Diesel Engine
Fossil fuels are non- renewable source of energy. It is difficult to predict its availability in future. It casts a shadow of uncertainty of its supply, the immediate effect of its scarcity is risingExpand
Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil
Increase in energy demand, stringent emission norms and depletion of oil resources have led the researchers to find alternative fuels for internal combustion engines. On the other hand waste plasticExpand
Waste Plastic Pyrolysis Oil as Alternative ForSI and CI Engines
Environmental concern and availability of petroleum fuels have caused interests in the search for alternate fuels for internal combustion engines. Conversion of waste to energy is one of the recentExpand
Investigation of Performance Analysis and Emission Characteristics of Waste Plastic Fuel
Today the world is confronted with the twin crisis of fossil fuel depletion and stringent emission norms, because of the environmental awareness. The disposal and degradation of waste plastic is aExpand
An experimental study on usage of plastic oil and B20 algae biodiesel blend as substitute fuel to diesel engine
TLDR
The process of converting plastic waste to fuel has now turned the problems into an opportunity to make wealth from waste and reveals that fuel properties are comparable with petroleum products. Expand
Prospects of pyrolysis oil from plastic waste as fuel for diesel engines: A review
The purpose ofthis study is to review the existing literature about chemical recycling of plastic waste and its potential as fuel for diesel engines. This is a review covering on the field ofExpand
Experimental Investigation on Combustion, Performance and Emission characteristics of blends of Plastic oil and Biodiesel as a substitute fuels in Diesel Engine
The thirst for fuel is steadily increasing as technology continues to open new areas of exploration. At the same time, the indiscriminate extraction of fossil fuels also may results in depletion ofExpand
...
1
2
3
4
5
...