Lubrication Properties of Vegetable Oils Combined with Boric Acid and Determination of Their Effects on Wear

@article{Dzckolu2009LubricationPO,
  title={Lubrication Properties of Vegetable Oils Combined with Boric Acid and Determination of Their Effects on Wear},
  author={Hayrettin D{\"u}zc{\"u}koğlu and Mustafa Acaroğlu},
  journal={Energy Sources, Part A: Recovery, Utilization, and Environmental Effects},
  year={2009},
  volume={32},
  pages={275 - 285}
}
Abstract Lubrication is essential in increasing a mechanical component's service duration and minimizing wear. Though synthetic and petrol-based oils are generally used in lubricants today, natural oils which are environment-friendly, biologically decomposable, and whose waste does not give harm to the environment have also begun to be used as lubricants recently thanks to an increasing awareness of the environment. In the present study, vegetable-oil based canola oil and boric acid were… Expand
Investigation of tribological mechanisms of a boron additive in lubricants and fuel enhancer
The effect of using a boric acid based additive in lubricants and fuel enhancers was investigated in this study. Experiments were performed in a reciprocating and a continuous sliding ball-on-diskExpand
EXPERIMENTAL INVESTIGATION OF WEAR BEHAVIOR OF BORAX-ADDED MINERAL OIL AT VARIOUS TEMPERATURES
Additives, which are used to reduce wear and friction coefficient and are added into petroleum-based oils in various amounts, are known to be harmful rather than beneficial unless an appropriateExpand
Nanomaterials as an Additive in Biodegradable Lubricants
The performance and effectiveness of nanoparticles as an additive in biobased natural ester (vegetable oil) lubricants are appraised. The entire chapter deals with the lubricating properties ofExpand
Investigation of the Effects of Boron Additives on the Performance of Engine Oil
In this study, the effect of boron compounds on lubrication oils was investigated using a pin-on-disc type test apparatus. For this purpose, base oils containing two types of boron compounds wereExpand
Vegetable Oil-Based Environmentally Friendly Fluids
Over the last several decades, the lubrication industry has been striving to bring environmentally friendly biobased lubricants, known as biolubricants, to prominence. With an estimated 50% of allExpand
The anti-wear enhancement of boric acid + molybdenum disulfide derived tribofilm
Additives are important components to reduce friction and wear of tribological systems. Zinc dithiophosphate (ZDDP), the most commonly used anti-wear additive prevents the tribological system fromExpand
A Review on the Science and Technology of Natural and Synthetic Biolubricants
Bio-based lubricants have gained prominence over conventional petroleum-based oils, progressively over the last two decades as biolubricants. This trend is observed in almost every industry that hasExpand
The Size Effect of Boron Nitride Particles on the Tribological Performance of Biolubricants for Energy Conservation and Sustainability
The size of particulate additives in a bio-based lubricant influences their friction and wear performance during sliding contact. The present investigation evaluates the effect of boron nitrideExpand
Tribological performance of self-lubricated polyamide6/boric oxide composites after water conditioning
  • K. S. Randhawa, Ashwin Patel
  • Materials Science
  • Pigment & Resin Technology
  • 2021
Purpose This paper aims to investigate the tribological performance, i.e. abrasion resistance, friction coefficient and wear rates, of self-lubricated water conditioned polyamide6/boric oxideExpand
Friction and wear mechanisms in AlMgB14-TiB2 nanocoatings
Abstract Recent tribological studies of AlMgB14-TiB2 nanocomposite coatings, sliding unidirectionally against AISI 52100 steel counterfaces under boundary-lubricated conditions, have shown sustainedExpand
...
1
2
3
...

References

SHOWING 1-10 OF 39 REFERENCES
On the friction and wear performance of boric acid lubricant combinations in extended duration operations
Lubrication is critical for minimizing wear in mechanical systems that operate for extended time periods. Developing lubricants that can be used in engineering systems without replenishment –Expand
On the Friction and Wear Performance of Boric Acid Lubricant Combinations in Extended Duration Operations
Lubrication is critical for minimizing wear in mechanical systems that operate for extended time periods. Developing lubricants that can be used in engineering systems without replenishment —Expand
The influence of lubricating fluid type on the properties of biodegradable greases
The lubricating ability of a grease depends on both the base oil and the thickener. As a result of their intrinsic properties and/or because of their com-patibility with thickeners and specificExpand
Tribological evaluation of coconut oil as an environment-friendly lubricant
Abstract Increased concerns about environmental damage caused by mineral oil based lubricants, has created a growing worldwide trend of promoting vegetable oil as base oil for automobile lubricants.Expand
Development of ecologically responsive lubricants
As a result of growing environmental concerns, vegetable oils are finding their way into lubricants for both industrial and transportation applications. These oils can offer significant environmentalExpand
Increasing formability in sheet metal stamping operations using environmentally friendly lubricants
Abstract In the present investigation, an alternative environmentally friendly lubricant is introduced for sheet metal forming processes. This lubricant is based on a combination of boric acid andExpand
Lubricants and the environment
Abstract About 1% of the total mineral oil consumption is used to formulate lubricants. Everywhere the production, application, and disposal of lubricants has to cover the requirements of the bestExpand
Lubricating properties of rapeseed-based oils
Three commercially available hydraulic/transmission lubricants based on rapeseed oil have been investigated for their lubricating properties. The coefficient of friction, scuffing-load capacity, andExpand
Scuffing load capacity of rapeseed-based oils
in response to the growing interest in environmentally acceptable fluids three commercially available lubricants based on rapeseed oil were investigated for their scuffing load capacity. The resultsExpand
Consideration of Lubricants for Temperatures above 1000 F
A study has been made of the various solid and liquid lubricants which could be considered for use to temperatures above 540 C. This study consisted of a literature survey to isolateExpand
...
1
2
3
4
...