Low formaldehyde emission, fast pressing, pine and pecan tannin adhesives for exterior particleboard

@article{Pizzi2007LowFE,
  title={Low formaldehyde emission, fast pressing, pine and pecan tannin adhesives for exterior particleboard},
  author={Antonio Pizzi and J. Valenezuela and Cristian Westermeyer},
  journal={Holz als Roh- und Werkstoff},
  year={2007},
  volume={52},
  pages={311-315}
}
Exterior grade particleboard satisfying the requirements of the V100 test, of formaldehyde emission well within the emission standard E1 class, and of pressing times as fast as 8.5 sec/mm can be produced at higher moisture contents using fast-reacting non-modified and non-fortified procyanidin/prodelphinidin tannin extracts such as pine bark tannin extract and pecan nut pith tannin extract. Such results, under the conditions reported are not achieved with the slower reacting tannins… 

Figures and Tables from this paper

Fast vs. slow-reacting non-modified tannin extracts for exterior particleboard adhesives
Non-fortified, non-modified tannin extracts, rather than chemically-modified tannin adhesives intermediates, can be used as effectively to produce excellent exterior grade particleoboard at fast
Tannin-based adhesives for bonding high-moisture Eucalyptus veneers: Influence of tannin extraction and press conditions
The alkaline extraction of tannins from Pinus pinaster bark was studied as regards the influence of solid/liquid ratio, extraction time and NaOH concentration on the yield and Stiasny number of the
Wood Adhesives Based on Natural Resources: A Critical Review: Part III. Tannin‐ and Lignin‐Based Adhesives
  • M. Dunky
  • Chemistry
    Progress in Adhesion and Adhesives
  • 2021
Resins based on so-called condensed tannins have been in industrial use for nearly 50 years as replacement for phenolic resins for wood based panels with high resistance against moisture and water as
The Effects of Some Synthetic Adhesives on the Formaldehyde Emission of the Particleboard
The formaldehyde emission is the one of the major problems of the particleboard industry that harms to human health and environment. The purpose of this study was to determine the effect of the
Tannin Gels and Their Carbon Derivatives: A Review
TLDR
This review presents and discusses the available studies on organic and carbon gels produced from tannin feedstock and how their properties are related to the different operating conditions, hence causing their cross-linking reaction mechanisms.
Dynamic wettability and curing characteristics of liquefied bark-modified phenol formaldehyde resin (BPF) on rice straw surfaces
Larch bark was liquefied in the presence of phenol and the obtained liquefied resultant was reacted with formaldehyde to prepare the liquefied bark-modified phenol formaldehyde resin (BPF) in an
Applications of Tannin Resin Adhesives in the Wood Industry
Tannin is extracted from natural sustainable materials. It is widely used to prepare tannin resin adhesives owing to its naturally occurring phenolic structure. This chapter aims to introduce the
Fast Pressing Composite Using Tannin-Furfuryl Alcohol Resin and Vegetal Fibers Reinforcement
Experimental investigations have been carried out on the potential use of tannin-furfuryl alcohol resin for biobased composites using vegetal fiber reinforcement. Results showed that a mixture
Utilization of bark flours as additive in plywood manufacturing
Increasing demand for wood based panel products and shortage of wood as raw material have triggered many efforts to utilize residues generated annually by the forest industries including a large
African tree bark exudate extracts as biohardeners of fully biosourced thermoset tannin adhesives for wood panels
Abstract A totally “bio” hardener derived from the exudate extract of the African trees Vachellia nilotica and Senegalia senegal was investigated. It hardened a maritime pine tannin resin without any
...
1
2
3
...

References

SHOWING 1-10 OF 11 REFERENCES
The Chemistry and Development of Pine Tannin Adhesives for Exterior Particleboard
Pine tannin-based adhesives obtained by the reaction of polymeric MDI (4,4'-diphenylmethane diisocyanate) with mildly sulphited pine tannin extract are described.Tolerance limits as regards moisture
Chemistry of Pecan Tannins and Analysis of Cure of Pecan Tannin-Based Cold-Setting Adhesives with a DMA ‘Micro-Beam’ Test
Condensed tannins from pecan nut pith are the only vegetable tannins produced commercially in the United States. They are mixed procyanidin-prodelphinidin polymers in which the prodelphinidins
A 13C NMR study of polyflavonoid tannin adhesive intermediates. I. Noncolloidal performance determining rearrangements
Chemical and heat treatments introduce noticeable modifications on the structure of four different polyflavonoid tannin extracts during their modification for use as tannin-form aldehyde
A comparative C13 NMR study of polyflavonoid tannin extracts for phenolic polycondensates
Assignment of C13 NMR bands to important sites of polymeric flavonoid tannin extracts produced industrially for production of tannin–formaldehyde resins is reported. Five different tannin extracts
1993e: The Chemistry and Development of PineTannin Adhesives for Exterior Particleboard
  • 1993
Wood adhesives : chemistry and technology
1993c: A I~C NMR Study of Polyflavonoid Tannin
  • 1993
German Patent Application Pizzi, A.; Stephanou, A. 1993a: Comparitive and Differential Behaviour of Pine vs. Pecan nut Tannin Adhesives for Particleboard, Holzforschung
  • 1993
1978b: Chemistry and Technology of Cold and Thermosetting Wattle Tannin based Wood Adhesives, PhD Thesis, University of the Orange Free State, South Africa Pizzi, A
  • Glue Blenders Effect on Particleboard using Wattle Tannin
  • 1979
...
1
2
...