Low-cost fabrication of flexible transparent electrodes based on Al doped ZnO and silver nanowire nanocomposites: impact of the network density.

@article{Nguyen2019LowcostFO,
  title={Low-cost fabrication of flexible transparent electrodes based on Al doped ZnO and silver nanowire nanocomposites: impact of the network density.},
  author={V. Nguyen and Jo{\~a}o Resende and Dorina T. Papanastasiou and Nil Fontanals and Carmen Jim{\'e}nez and David Mu{\~n}oz-Rojas and Daniel Bellet},
  journal={Nanoscale},
  year={2019}
}
We report the study of nanocomposite transparent electrodes based on aluminium doped zinc oxide (ZnO : Al) thin films and silver nanowire (AgNW) networks. The electrodes are fully fabricated by low-cost, open-air techniques, namely, atmospheric pressure spatial atomic layer deposition and spray coating. We show that the transparency and the electrical conductivity of the ZnO : Al/AgNW nanocomposites can be tuned by controlling the AgNW network density. We also demonstrate that the thermal… 
Versatility of bilayer metal oxide coatings on silver nanowire networks for enhanced stability with minimal transparency loss.
TLDR
It is demonstrated that by depositing a second oxide coating, which acts as an antireflective layer, it is possible to obtain highly stable and transparent composite electrodes, which are compatible with high-throughput scalable fabrication.
Double-Sided Graphene Oxide Encapsulated Silver Nanowire Transparent Electrode with Improved Chemical and Electrical Stability
TLDR
A scalable and economically viable process involving electrophoretic deposition (EPD) to fabricate a highly stable hybrid transparent electrode with a sandwich-like structure, where a AgNW network is covered by graphene oxide (GO) films on both sides.
Flexible Transparent Heater Fabricated from Spray-Coated In:ZnO/Ag-NWs/In:ZnO Multilayers on Polyimide Foil
A flexible transparent heater is presented, based on an all-sprayed composite architecture of indium-doped zinc oxide (IZO) layers that sandwich a network of silver nanowires, on a polyimide-foil
Joining of copper nanowires by electrodepositing silver layer for high-performance transparent electrode
Copper nanowire (CuNW) has been considered as one of the most promising materials to replace ITO for transparent electrode (TE). However, the loose connections and oxidation problem limited its
Effects of non-homogeneity and oxide coating on silver nanowire networks under electrical stress: comparison between experiment and modeling
TLDR
It is shown that induced non-homogeneities have a strong impact both on the spatial distribution of temperature and the current density throughout the electrode and this will contribute to the design and fabrication of more robust nanowire networks, particularly for application in transparent heaters.
Ultrathin-shell epitaxial Ag@Au core-shell nanowires for high-performance and chemically-stable electronic, optical, and mechanical devices
Silver nanowires (AgNWs) hold great promise for applications in wearable electronics, flexible solar cells, chemical and biological sensors, photonic/plasmonic circuits, and scanning probe microscopy
...
1
2
3
...

References

SHOWING 1-10 OF 64 REFERENCES
Stability Enhancement of Silver Nanowire Networks with Conformal ZnO Coatings Deposited by Atmospheric Pressure Spatial Atomic Layer Deposition.
TLDR
An atmospheric pressure spatial atomic layer deposition is used to fabricate hybrid transparent electrode materials in which the AgNW network is protected by a conformal thin layer of zinc oxide, and it is shown that the AP-SALD ZnO-coated AgNW networks can be effectively used as very stable transparent heaters.
High performance ZnO-SnO₂:F nanocomposite transparent electrodes for energy applications.
TLDR
High quality hazy ZnO-SnO2:F thin layers are formed with an averaged haze factor ranging from 0.4 to 64.2% over the 400-1100 nm solar spectrum wavelength range while the sheet resistance is kept smaller than 15 Ω/sq for an average total optical transmittance close to 80%.
Smooth ZnO:Al-AgNWs Composite Electrode for Flexible Organic Light-Emitting Device
TLDR
A nano-composite TCE, which is made of a silver nanowire (AgNW) network, combined with aluminum-doped zinc oxide (ZnO:Al, AZO) by atomic layer deposition, which suggests that this approach can replace conventional ITO TCEs in organic electronic devices in the future.
Optimization of silver nanowire-based transparent electrodes: effects of density, size and thermal annealing.
TLDR
This work reports excellent optical and electrical properties of electrodes fabricated from AgNW networks with a transmittance T = 89.2% and a sheet resistance of Rs = 2.9 Ω □(-1), leading to the highest reported figure of merit.
Highly flexible transparent film heaters based on random networks of silver nanowires
AbstractWe demonstrate a new concept for the fabrication of flexible transparent thin film heaters based on silver nanowires. Thanks to the intrinsic properties of random networks of metallic
Highly Robust Indium‐Free Transparent Conductive Electrodes Based on Composites of Silver Nanowires and Conductive Metal Oxides
A hybrid approach for the realization of In-free transparent conductive layers based on a composite of a mesh of silver nanowires (NWs) and a conductive metal-oxide is demonstrated. As metal-oxide
Highly Robust Silver Nanowire Network for Transparent Electrode.
TLDR
These key findings not only demonstrated a general and effective method to improve the thermal and chemical stabilities of metal nanowire networks but also provided a basic guideline toward rational design of highly efficient and robust composite electrodes.
Thermally Stable Silver Nanowire–Polyimide Transparent Electrode Based on Atomic Layer Deposition of Zinc Oxide on Silver Nanowires
The performance of a flexible transparent conductive electrode with extremely smooth topography capable of withstanding thermal processing at 300 °C for at least 6 h with little change in sheet
...
1
2
3
4
5
...