Lithium-Ion Batteries and Materials

@inproceedings{Lundgren2017LithiumIonBA,
  title={Lithium-Ion Batteries and Materials},
  author={Cynthia A. Lundgren and Kang Xu and T. Richard Jow and Jan L Allen and Shengbo Zhang},
  year={2017}
}
Lithium-ion (Li-ion) batteries are now widely implemented as the power or energy source for everything from portable electronics to electric vehicles. The electrochemical charge storage in the batteries is intimately related to their material properties. This chapter gives an overview of the methods for characterizing battery materials, both ex situ and in situ in practical cells. An important consideration is the interphase between the active charge storage materials and the electrolyte, often… 
Graphene-modified LiFePO4 cathodes for advanced Li-/Na-ion secondary batteries
Nowadays, the ways our modern society faces challenges related to climate change, air pollution and energy production represent key concerns worldwide. The global energy scenario confirms a large
Effect of thermo-physical properties of cooling mass on hybrid cooling for lithium-ion battery pack using design of experiments
The environmental and sustainability issues related to fossil fuel have made electric vehicles an alternative solution with lithium ion (Li-Ion) as the energy source. The sensitive nature of Li-Ion
Electrodeposited Zinc-based Films as Anodes for Aqueous Zinc Batteries.
TLDR
The electrodeposited zinc-based anodes exhibit low electrode polarization and stable cycling performance in 50 cycle consecutive experiments from 0.26-10 mA cm-2 compared to commercial Zn foil, and show enhanced capacity for up to 100 cycles at 100 mA g-1, making them viable anodes for commercial use.
Compactness analysis of PCM-based cooling systems for lithium battery-operated vehicles
Demand for sustainable transport system is craving for hybrid and electric vehicles with high-power and high-energy electric storage system for increased range of haul. To support such high-power
Optimization of poly(vinylidene fluoride) membranes for enhanced power density of thermally driven electrochemical cells
The thermally driven electrochemical cells (TECs) convert the applied temperature gradient (ΔT) across electrodes, in redox-based electrolytes, into electricity. We, in this report, amplify the power
Modeling of Ionic Conductivity in Inorganic Compounds with Multivalent Cations
This work is dedicated to search for promising ion-conducting crystals by using of high-throughput computer screening of the ICSD database of inorganic structures and quantum-mechanical modeling of
Aqueous lithium‐ion batteries
Aqueous electrolytes were once the rule for the battery industry. Until the advent of lithium ion batteries, a majority of commercially relevant batteries utilized water as the solvent for ion
References
  • Lithium-Ion Battery Chemistries
  • 2019
...
...

References

SHOWING 1-10 OF 104 REFERENCES
Precision Measurements of the Coulombic Efficiency of Lithium-Ion Batteries and of Electrode Materials for Lithium-Ion Batteries
Undesired reactions in Li-ion batteries, which lead to capacity loss, can consume or produce charge at either the positive or negative electrode. For example, the formation and repair of the solid
Lithium batteries and cathode materials.
TLDR
This paper will describe lithium batteries in more detail, building an overall foundation for the papers that follow which describe specific components in some depth and usually with an emphasis on the materials behavior.
Electrolytes for Low Temperature Operations of Li-Ion Batteries
The factors that limit the low temperature performance of Li-ion batteries were examined using an impedance analysis technique. The charge transfer resistance, Rct, obtained by this technique was
High-energy batteries
Abstract : Research concerned: (1) lithium batteries based on organic aprotic solvents and (2) aqueous AgO/Zn batteries. Techniques were established for reducing the impurity content of propylene
High-Voltage Electrolytes Based on Adiponitrile for Li-Ion Batteries
Adiponitrile, CN CH2 4CN, ADN, was evaluated as both a solvent and cosolvent in safer and more electrochemically stable electrolytes suitable for high energy and power density Li-ion batteries. An
Interfacing electrolytes with electrodes in Li ion batteries
Aqui… Onde a terra termina e o mar ja nao comeca —A poetic definition of a binary liquid/solid interface by Luis de Camoes (1572). Since its birth in early 1990s, Li ion battery
Nanoscale mapping of ion diffusion in a lithium-ion battery cathode.
TLDR
The spatial variation of lithium-ion diffusion times in the battery-cathode material LiCoO(2) is probed at a resolution of ∼100 nm by using an atomic force microscope to both redistribute lithium ions and measure the resulting cathode deformation, revealing that the diffusion coefficient increases for certain grain orientations and single-grain boundaries.
...
...