Latest R&D news and beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

@article{Irles2020LatestRN,
  title={Latest R\&D news and beam test performance of the highly granular SiW-ECAL technological prototype for the ILC},
  author={Adri'an Irles},
  journal={Journal of Instrumentation},
  year={2020},
  volume={13},
  pages={C02038 - C02038}
}
  • A. Irles
  • Published 22 February 2018
  • Physics
  • Journal of Instrumentation
High precision physics at future colliders as the International Linear Collider (ILC) require unprecedented high precision in the determination of the energy of final state particles. The needed precision will be achieved thanks to the Particle Flow algorithms (PF) which require highly granular and hermetic calorimeters systems. The physical proof of concept of the PF was performed in the previous campaign of beam tests of physic prototypes within the CALICE collaboration. One of these… 

Beam test performance of a highly granular silicon tungsten calorimeter technical prototype for the ILD

A highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) is the reference design of the ECAL for International Large Detector concept, one of the two detector concepts for the future

Testing Highly Integrated Components for the Technological Prototype of the CALICE SiW-ECAL

A highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) is the reference design of the ECAL for International Large Detector (ILD) concept, one of the two detector concepts for the

Testing Highly Integrated Components for the Technological Prototype of the CALICE SiW-ECAL

  • A. Irles
  • Physics
    2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
  • 2019
A highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) is the reference design of the ECAL for International Large Detector (ILD) concept, one of the two detector concepts for the

ILD silicon tungsten electromagnetic calorimeter first full scale electronic prototype

  • F. MagnietteJ. Nanni J. Brient
  • Physics
    Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
  • 2020

Commissioning of the highly granular SiW-ECAL technological prototype

In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features

CALICE SiW ECAL—development and test of the chip-on-board PCB solution

The highly granular silicon-tungsten electromagnetic calorimeter (SiW ECAL) is the reference design of the ECAL for the International Large Detector (ILD) concept, one of the two detector concepts

CALICE SiW ECAL—development and test of the chip-on-board PCB solution

The highly granular silicon-tungsten electromagnetic calorimeter (SiW ECAL) is the reference design of the ECAL for the International Large Detector (ILD) concept, one of the two detector concepts

Preparation and operation of SiW-ECAL technological prototype for DESY test beam 2019.

We are developing SiW-ECAL technological prototypes with the aim of optimizing readout structure for $e^+e^-$ linear collider application. Developments are being carried out under the cooperation of

Implementation of large imaging calorimeters

  • V. Boudry
  • Physics
    Proceedings of 40th International Conference on High Energy physics — PoS(ICHEP2020)
  • 2021
The next generation of collider detectors will make full use of Particle Flow algorithms, requiring high precision tracking and imaging calorimeters. Featuring a granularity by 2 to 3 orders of

International Large Detector: Interim Design Report

The ILD detector is proposed for an electron-positron collider with collision centre-of-mass energies from 90~\GeV~to about 1~\TeV. It has been developed over the last 10 years by an international

References

SHOWING 1-10 OF 30 REFERENCES

Design and electronics commissioning of the physics prototype of a Si-W electromagnetic calorimeter for the International Linear Collider

The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the electromagnetic calorimeter,

Commissioning of the highly granular SiW-ECAL technological prototype

In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features

The International Linear Collider Technical Design Report - Volume 1: Executive Summary

The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on

The International Linear Collider Technical Design Report - Volume 3.I: Accelerator \& in the Technical Design Phase

The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on

Tests of a particle flow algorithm with CALICE test beam data

The studies presented in this paper provide a first experime ntal test of the Particle Flow Algorithm (PFA) concept using data recorded in high granula rity calorimeters. Pairs of overlaid pion

Experimental tests of particle flow calorimetry

Precision physics at future colliders requires highly granular calorimeters to support the Particle Flow Approach for event reconstruction. This article presents a review of about 10 - 15 years of

Study of the interactions of pions in the CALICE silicon-tungsten calorimeter prototype

A prototype silicon-tungsten electromagnetic calorimeter for an ILC detector was tested in 2007 at the CERN SPS test beam. Data were collected with electron and hadron beams in the energy range 8 to