LBNL high field core program

@article{Caspi2011LBNLHF,
  title={LBNL high field core program},
  author={Shlomo Caspi},
  journal={arXiv: Accelerator Physics},
  year={2011}
}
  • S. Caspi
  • Published 9 August 2011
  • Physics
  • arXiv: Accelerator Physics
The LBNL Superconducting Magnet Group mission is to develop and establish the technologies associated with high field superconducting magnets in order to provide cost-effective options for the next-generation high-energy physics accelerators. The research effort is part of the group core program and the development is part of the LARP program discussed elsewhere at this workshop. 

References

SHOWING 1-10 OF 12 REFERENCES

Toward Integrated Design and Modeling of High Field Accelerator Magnets

The integrated design approach for high field superconducting accelerator magnets is reported, analysis results are discussed, and areas of future interest are pointed out.

Developmentof the 15 T Nb3Sn dipole HD2

The Superconducting Magnet Program at Lawrence Berkeley National Laboratory (LBNL) is continuing the development of HD2, a 1 m long Nb{sub 3}Sn dipole generating a dipole field of 15 T in a 36 mm

Test results for HD1, a 16 tesla Nb/sub 3/Sn dipole magnet

The Superconducting Magnet Group at Lawrence Berkeley National Laboratory has been developing the technology for using brittle superconductor in high-field accelerator magnets. HD1, the latest in a

Design of HD2: a 15 tesla Nb/sub 3/Sn dipole with a 35 mm bore

The Nb/sub 3/Sn dipole HD1, recently fabricated and tested at LBNL, pushes the limits of accelerator magnet technology into the 16 T field range, and opens the way to a new generation of HEP

Towards Computing Ratcheting and Training in Superconducting Magnets

The Superconducting Magnet Group at Lawrence Berkeley National Laboratory (LBNL) has been developing 3D finite element models to predict the behavior of high field Nb3Sn superconducting magnets. The

Test Results for HD1, a 16 Tesla Nb3Sn Dipole Magnet

4A-a03 SC-MAG#820 LBNL-S3243 Test Results for HD 1, a 16 Tesla Nb 3 Sn Dipole Magnet A.F. Lietzke, S. Bartlett, P. Bish, S. Caspi, L. Chiesa, D. Dietderich, P. Ferracin, S.A. Gourlay, M. Goli, R.R.

Assembly and Test of HD2, a 36 mm Bore High Field ${\rm Nb}_{3}{\rm Sn}$ Dipole Magnet

We report on the fabrication, assembly, and test of the Nb3Sn dipole magnet HD2. The magnet, aimed at demonstrating the application of Nb3Sn superconductor in high field accelerator-type dipoles,

Assembly and Test of HD2, a 36 mm bore high field Nb3Sn Dipole Magnet

Assembly and Test of HD2, a 36 mm bore high field Nb 3 Sn Dipole Magnet P. Ferracin, B. Bingham, S. Caspi, D. W. Cheng, D. R. Dietderich, H. Felice, A. Godeke, A. R. Hafalia, C. R. Hannaford, J.

Mechanical Design of HD2, a 15 T$hboxNb_3hboxSn$Dipole Magnet with a 35 mm Bore

After the fabrication and test of HD1, a 16 T Nb3Sn dipole magnet based on flat racetrack coil configuration, the Superconducting Magnet Program at Lawrence Berkeley National Laboratory (LBNL) is

Mechanical Design of HD2, a 15 T Nb3Sn Dipole Magnet with a 35 mm Bore

WEA07PO11 Mechanical Design of HD2, a 15 T Nb 3 Sn Dipole Magnet with a 35 mm Bore P. Ferracin, S. E. Bartlett, S. Caspi, D. R. Dietderich, S. A. Gourlay, A. R. Hafalia, C. R. Hannaford, A. F.