Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide Filled Glass Fabric-Epoxy Composites

@article{Mohan2010InvestigationOT,
  title={Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide Filled Glass Fabric-Epoxy Composites},
  author={N. Mohan and S. Natarajan and S. P. Kumareshbabu and Siddaramaiah},
  journal={Journal of Minerals and Materials Characterization and Engineering},
  year={2010},
  volume={09},
  pages={231-246}
}
The effect of silicon carbide (SiC) particulate fillers incorporation on two-body abrasive wear behaviour of Glass Fabric - Epoxy (GE) composites was investigated and findings are analysed. The mechanical properties such as impact strength and surface hardness of the composites have also been reported. The wear behaviour of the composites were performed using pin-on-disc tester at varying abrasive distances viz., 25, 50, 75 and 100 m at a constant load of 10 N. The experiment was conducted… Expand
Abrasive wear behaviour of hard powders filled glass fabric–epoxy hybrid composites
Abstract The effect of incorporation of tungsten carbide (WC) and tantalum niobium carbide (Ta/NbC) powders on three-body abrasive wear behaviour in glass fabric–epoxy (G–E) composites wasExpand
Friction and Dry Sliding Wear Behaviour of Granite - Fly Ash Filled Glass Epoxy Composites
This paper concentrates on the comparative study on frictional performance of glass-epoxy composite with influence of Granite and fly ash filler are experimentally investigated under constant loadExpand
Physical, mechanical and abrasive wear behaviour of jute fiber reinforced polymer composites
Now-a-days, abrasive wear of engineering and agricultural machine components caused by the abrasive particles is a major industrial problem. Therefore, a full understanding of the effects of allExpand
Physico-Mechanical and Tribological Properties of Glass Fiber Based Epoxy Composites
Polymeric materials reinforced with synthetic fibers like glass, carbon, and aramid provide advantage of high stiffness and strength to weight ratio as compared to conventional materials like wood,Expand
Sliding Wear Behavior of Graphite Filled Glass-Epoxy Composites at Elevated Temperatures
Effect of filler material on sliding wear behavior of Glass-Epoxy (G-E) composites has been investigated. The sliding distance, applied load, sliding velocity and temperature are the parameters usedExpand
Study of mechanical and Wear behavior of carbon fiber reinforced epoxy resin composites with alumina filler additions
This paper describes the fabrication and testing of carbon fiber reinforcement epoxy resin composites with alumina filler added to the matrix. Carbon fiber reinforced epoxy composites without fillersExpand
Tribological and Mechanical Properties of Epoxy Reinforced by Hybrid Nanoparticles
IN THE PRESENT WORK, THE NANO-ALUMINUM OXIDE (AL2O3), NANO-SILICON CARBIDE (SIC), OR A HYBRID OF THEM WERE INFUSED INTO EPOXY RESIN WITH AN ULTRASONIC SYSTEM WITH VARIOUS WEIGHT PERCENTAGE RATIOS OFExpand
Tribological and Mechanical Properties of Epoxy Reinforced by Hybrid Nanoparticles
In the present work, the nano-Aluminum oxide (Al2O3), nano-Silicon Carbide (SiC), or a hybrid of them were infused into epoxy resin with an ultrasonic system with various weight percentage ratios ofExpand
Tribology of fiber reinforced polymer matrix composites—A review
The use of fiber reinforced polymer matrix composites (FRPCs) is in boom in many structural, industrial, automotive, and engineering applications. Polymer matrix composites have been turned out theExpand
A review on mechanical and wear properties of fiber-reinforced thermoset composites with ceramic and lubricating fillers
Abstract The need for exploring the mechanical and wear behavior of thermoset polymers and their composites is found to be ever-increasing, owing to their usage in an enormous number of engineeringExpand
...
1
2
3
...

References

SHOWING 1-10 OF 33 REFERENCES
Three-body abrasive wear behaviour of particulate-filled glass–vinyl ester composites
Abstract The incorporation of silicon carbide (SiC) and graphite fillers on three-body abrasive wear behaviour of glass–vinyl ester (G–V) composites has been investigated. Dry sand/rubber wheelExpand
On the abrasive wear behaviour of mineral filled polypropylene
Abstract The effects of mineral fillers on the wear resistance of polypropylene (PP) have been investigated. A general purpose homopolymer grade was used as the matrix. The mineral fillersExpand
Wear mechanisms in polymer matrix composites abraded by bulk solids
Abstract An experimental study of the wear of polymer matrix composite materials subjected to abrasion from bulk materials has been conducted. Three examples of vinyl ester resin systems wereExpand
Two-body dry abrasive wear of cermets
Abstract The present paper concerns the two-body dry abrasive wear phenomenon of a series of cermets on the base of titanium and chromium carbides with different composition, using a “block onExpand
Effect of organoclay addition on the two-body abrasive wear characteristics of polyamide 6 nanocomposites
Polymer clay nanocomposites (PCN) exhibit improved mechanical properties due to nanolevel dispersion of clay in the polymer matrix. They also exhibit good tribological performance under dry slidingExpand
The effect of fillers on the wear resistance of thermoplastic polymeric coatings
Abstract Thermoplastic polymer matrix composites are used as coating materials for the bore of downhole tubulars used as water injectors in the oil industry. These coatings are primarily employed forExpand
Microscale abrasive wear of polymeric materials
Abstract Polymeric materials are now commonly employed as components in mechanical devices, and as such are subject to wear. Abrasive wear of polymer components may occur either by sliding against aExpand
The effect of abrasive grain size on the transition between abrasive and adhesive wear
Abstract Experiments were carried out in which SiC abrasives with a grain size range of 3–150 μm were inserted between sliding metals. The metals were pure aluminium, copper, iron, nickel and zinc.Expand
Abrasive wear of polymers
Abstract The main features of the abrasion of polymers are outlined in an attempt to formulate a general picture of the wear processes involved. The relative roles of plastic and elastic deformationExpand
Tribological behaviour of carbon–carbon composite
Abstract In the present study, the wear behaviour of cross ply (0/90°) C–C composite with 60 vol.-% fibres has been studied with sliding distance, applied load and sliding velocities. The measurementExpand
...
1
2
3
4
...