Investigation on Two-Body Abrasive Wear Behavior of Tungsten Carbide Filled Glass Fabric-Epoxy Hybrid Composites

@article{KumareshBabu2010InvestigationOT,
  title={Investigation on Two-Body Abrasive Wear Behavior of Tungsten Carbide Filled Glass Fabric-Epoxy Hybrid Composites},
  author={S. P. Kumaresh Babu and A. Richey Sharrett Chairman and N. Mohan and Siddaramaiah},
  journal={Advanced Materials Research},
  year={2010},
  volume={123-125},
  pages={1039 - 1042}
}
The effect of tungsten carbide (WC) particulate fillers incorporation on two-body abrasive wear behaviour of glass fabric reinforced-epoxy (GE) composites was investigated and findings are interpreted. The wear behaviour of the composites were performed using pin-on-disc tester at varying abrasive distances viz., 25,50,75 and 100 m at a constant load of 20 N. The experiment was conducted using two different water proof silicon carbide (SiC) abrasive papers and at two different velocity under… Expand
3 Citations
Sliding Wear Behavior of Graphite Filled Glass-Epoxy Composites at Elevated Temperatures
Effect of filler material on sliding wear behavior of Glass-Epoxy (G-E) composites has been investigated. The sliding distance, applied load, sliding velocity and temperature are the parameters usedExpand
A review on mechanical and wear properties of fiber-reinforced thermoset composites with ceramic and lubricating fillers
Abstract The need for exploring the mechanical and wear behavior of thermoset polymers and their composites is found to be ever-increasing, owing to their usage in an enormous number of engineeringExpand
Titanium carbide ceramic nanocrystals to enhance the physicochemical properties of natural rubber composites
The mechanical strength of natural rubber (NR) was enhanced by incorporating novel titanium carbide (TiC) nanocrystals as a filling material. The rubber nanocomposites were prepared through mixingExpand

References

SHOWING 1-4 OF 4 REFERENCES
Microstructural efficiency and fracture toughness of short fiber/thermoplastic matrix composites
Abstract This paper outlines the fracture behavior of composites with thermoplastic matrices of different fracture toughness Kcm (increasing in the order PPS → PET (I) → PET (II) → ETFE → PC). InExpand
Plain and filled plastics materials in bearings: a review
Abstract A brief survey of plastics materials suitable for possible use in bearings is given. The approach has been one of the design selection of particular plastics, both plain and filled. TheExpand
Bushan, ‘Principles and Applications of Tribology
  • A Wiley-Interscience Publication,
  • 1999
Lubrication and Wear Technology
  • 1992