Investigation of modified ATLAS pixel implantations after irradiation with neutrons

@article{Gisen2019InvestigationOM,
  title={Investigation of modified ATLAS pixel implantations after irradiation with neutrons},
  author={Andreas Gisen and Silke Altenheiner and Claus Gossling and Monika Grothe and Reiner Klingenberg and Kevin Kroninger and Jonas Lonker and M. Weers and Tobias Wittig and Felix Wizemann},
  journal={Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment},
  year={2019}
}
  • A. Gisen, S. Altenheiner, F. Wizemann
  • Published 2 February 2018
  • Physics
  • Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

Figures and Tables from this paper

References

SHOWING 1-10 OF 17 REFERENCES
Planar slim-edge pixel sensors for the ATLAS upgrades
The ATLAS detector at CERN is a general-purpose experiment at the Large Hadron Collider (LHC). The ATLAS Pixel Detector is the innermost tracking detector of ATLAS and requires a sufficient level of
submitter : Slim edge studies, design and quality control of planar ATLAS IBL pixel sensors
One of the four large experiments at the LHC at CERN is the ATLAS detector, a multi purpose detector. Its pixel detector, composed of three layers, is the innermost part of the tracker. As it is
Test-beam activities and results for the ATLAS ITk pixel detector
The Phase-II upgrade of the LHC aims at an increase of the instantaneous luminosity up to about 5 × 1034 cm−2s−1. To cope with the resulting challenges the current Inner Detector will be replaced by
Planar pixel sensors for the ATLAS upgrade: beam tests results
The performance of planar silicon pixel sensors, in development for the ATLAS Insertable B-Layer and High Luminosity LHC (HL-LHC) upgrades, has been examined in a series of beam tests at the CERN SPS
Prototype ATLAS IBL modules using the FE-I4A front-end readout chip
The ATLAS Collaboration will upgrade its semiconductor pixel tracking detector with a new Insertable B-layer (IBL) between the existing pixel detector and the vacuum pipe of the Large Hadron
Prototype ATLAS IBL Modules using the FE-I4A Front-End Readout Chip
The ATLAS Collaboration will upgrade its semiconductor pixel tracking detector with a new Insertable B-layer (IBL) between the existing pixel detector and the vacuum pipe of the Large Hadron
Planar n-in-n quad module prototypes for the ATLAS ITk upgrade at HL-LHC
In order to meet the requirements of the High Luminosity LHC (HL-LHC), it will be necessary to replace the current tracker of the ATLAS experiment. Therefore, a new all-silicon tracking detector is
Power dissipation studies on planar n+-in-n pixel sensors
Investigation of Irradiated Silicon Detectors by Edge-TCT
A Transient Current Technique (TCT) utilizing an IR laser with 100 ps pulse width and beam diameter of FWHM = 8 μm was used to evaluate non-irradiated and irradiated p-type silicon micro-strip
...
...