Interplay between temperature and bandgap energies on the outdoor performance of perovskite/silicon tandem solar cells

@article{Aydin2020InterplayBT,
  title={Interplay between temperature and bandgap energies on the outdoor performance of perovskite/silicon tandem solar cells},
  author={Erkan Aydin and Thomas Wesley Allen and Michele De Bastiani and Lujia Xu and Jorge {\'A}vila and Michael Salvador and Emmanuel van Kerschaver and Stefaan De Wolf},
  journal={Nature Energy},
  year={2020},
  volume={5},
  pages={851-859}
}
Evaluation of annual performance for building‐integrated photovoltaics based on 2‐terminal perovskite/silicon tandem cells under realistic conditions
The authors optimized the thickness of the layers in the 1.67‐eV‐bandgap‐perovskite sub‐cell of a 2‐terminal perovskite/silicon monolithic tandem solar cell under standard test conditions to get the
Lessons learned from the first outdoor test of perovskite/silicon tandem solar cells
Perovskite/silicon tandem solar cells promise power conversion efficiencies (PCE) beyond the thermodynamic limit of single-junction devices. This potential has been unveiled via several champion
A New Type of Architecture of Dye-Sensitized Solar Cells as an Alternative Pathway to Outdoor Photovoltaics
The current investigation shows a possible new pathway for more efficient and cost-effective energy-harvesting photovoltaic devices. Our approach could permit all emerging technologies that are
Developing the Next-Generation Perovskite/Si Tandems: Toward Efficient, Stable, and Commercially Viable Photovoltaics.
Perovskite/silicon tandem solar cells have attracted research interests worldwide because of their potential to achieve a high power conversion efficiency (PCE) at a low cost. With the latest record
Performance and Stability of Halide Perovskite Solar Cells in Bahir Dar Climatic Conditions
  • G. M. Meheretu, G. A. Wubetu, S. Stranks
  • Environmental Science
    Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
  • 2022
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 43 REFERENCES
Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures
TLDR
A consensus between researchers in the field is reported on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols, and additional procedures to account for properties specific to PSCs are proposed.
Eco‐Friendly Spray Deposition of Perovskite Films on Macroscale Textured Surfaces
An innovative sequential eco‐friendly spray coating (SEF‐SC) technique is developed to uniformly deposit metal halide perovskite films on macroscale textured surfaces, such as textured
Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon
TLDR
Tandems that combine solution-processed micrometer-thick perovskite top cells with fully textured silicon heterojunction bottom cells are reported, which presents the possibility of overcoming the single-junction Shockley-Queisser limit in photovoltaics.
Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites
TLDR
It is shown that by using phenethylammonium as a two-dimensional additive, along with iodine and thiocyanate, bromine-rich perovskite films can be stabilized and, by doing so, improve the carrier mobility and stability in silicon tandem solar cells.
Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells
Inverted perovskite solar cells have attracted increasing attention because they have achieved long operating lifetimes. However, they have exhibited significantly inferior power conversion
Revealing the origin of voltage loss in mixed-halide perovskite solar cells
The tunable bandgap of metal-halide perovskites has opened up the possibility of tandem solar cells with over 30% efficiency. Iodide–bromide (I–Br) mixed-halide perovskites are crucial to achieve the
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
TLDR
A method for incorporating chloride is reported that allows for fabrication of stable triple-halide perovskites with a band gap of 1.67 electron volts and a factor of 2 increase in photocarrier lifetime and charge-carrier mobility that resulted from enhancing the solubility of chlorine by replacing some of the iodine with bromine to shrink the lattice parameter.
An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss
Newly developed passivation strategy results in unprecedented perovskite optoelectronic device performances.
Defect and Contact Passivation for Perovskite Solar Cells.
TLDR
The focus is on the origin of the various voltage-limiting mechanisms in PSCs, and the effect of such methods on the reduction of hysteresis are described.
...
1
2
3
4
5
...