Integration of an Active-Filter and a Single-Phase AC/DC Converter with Reduced Capacitance Requirement and Component Count

Abstract

Existing methods of incorporating an active filter into an AC/DC converter for eliminating electrolytic capacitors usually require extra power switches. This inevitably leads to an increased system cost and degraded energy efficiency. In this paper, a concept of active-filter integration for singlephase AC/DC converters is reported. The resultant converters can provide simultaneous functions of power factor correction (PFC), DC voltage regulation and active power decoupling for mitigating the low-frequency DC voltage ripple, without an electrolytic capacitor and extra power switch. To complement the operation, two closed-loop voltage-ripple-based reference generation methods are developed for controlling the energy storage components to achieve active power decoupling. Both simulation and experiment have confirmed the eligibility of the proposed concept and control methods in a 210 W rectification system comprising an H-bridge converter with a half-bridge active filter. Interestingly, the end converters (Type I and Type II) can be readily available using a conventional H-bridge converter with minor hardware modification. A stable DC output with merely 1.1% ripple is realized with two 50 μF film capacitors. For the same ripple performance, a 900 μF capacitor is required in conventional converters without an active filter. Moreover, it is found out that the active-filter integration concept might even improve the efficiency performance of the end converters as compared with the original AC/DC converter without integration.

20 Figures and Tables

Cite this paper

@inproceedings{Li2015IntegrationOA, title={Integration of an Active-Filter and a Single-Phase AC/DC Converter with Reduced Capacitance Requirement and Component Count}, author={Sinan Li and W. G. Qi}, year={2015} }